holden.wiki

• MODEL SELECTION INDEX
• SERVICE TECHLINES - MENU
• 1998 - SERVICE TECHLINES
  • GROUP 0B - GENERAL
    • GROENEVELD SPEED LIMITERS
    • ADDITIONAL INFO FOR LABOUR TIME MANUAL
    • SERVICE INFOR FOR NYLON TUBE (FULL AIR BRAKES)
    • BELT TENSION INFO. FOR WORKSHOP MANUAL
    • CORRECTION TO SPARK PLUG MAINTENANCE SCHEDULE
    • CRACKED MUD GUARDS
    • YEAR 2000 COMPLIANCE OF ISUZU PRODUCTS
  • GROUP 1 - BODY
    • CAB STEP SUPPORT ASSEMBLY
    • CABIN DUST ENTRY AT TAILGATE
  • GROUP 2 - HEATING & A/COND.
    • A/C THERMISTOR TEMPERATURE REVISION
    • A/C COMPRESSOR MOUNT / ALTERNATOR MOUNT
    • CORRECTION TO A/C FITTING INSTRUCTIONS - P/N M41281
    • CORRECTION TO A/C FITTING INSTRUCTIONS - P/N M41682
    • AIR CONDITIONING SYSTEM OIL
    • CHANGES TO A/C KITS - M41682 & 92141532
    • CHECKING FOR EVAPORATOR COIL ICE-UP
    • A/C THERMISTOR LOCATION ON EVAPORATOR
    • CHANGES TO A/C KITS
    • A/C DIAGNOSTIC SLIDE RULE
    • CHANGE TO A/C IDLER PULLEY AND MOUNTING
    • 1998 2.2 LITRE A/C IDLER PULLEY
    • A/C SUCTION HOSE SHAPE CHANGE (PETROL MODEL)
    • 50 TH ANNINVERSARY V6 RODEO A/C SYSTEM CHECK
    • BATTERY REINSTALLATION PROCEDURE AFTER A/C INSTALLATION
  • GROUP 4 - REAR SUSPENSION
    • ROCKWELL CHANGE OF SERIAL NUMBER FORMAT
    • NQR 450 TURBO SPRINGS
  • GROUP 5 - BRAKES
    • MONTEREY FRONT SPEED SENSOR FOR ABS BRAKES
    • BRAKE SQUEAK IN REVERSE
    • LOAD SENSING PROPORTIONING VALVE ADJUSTMENT
  • GROUP 6A - ENGINE
    • 4JBI / 4JG2 OIL PAN DRAIN PLUG TIGHTENING TORQUE
    • 6VD1 CYLINDER HEAD OIL CONTROL VALVES
    • 4JB1T INJECTION PUMP TIMING SPECIFICATION CHANGE
    • DIESEL COLD ENGINE KNOCK
    • WORKSHOP MANUAL CORRECTION 6BD1 PISTON RING GAP
    • WORKSHOP MANUAL ADDITION 4JB1T CRANKSHAFT JOURNALS
    • WORKSHOP MANUAL CORRECTION 4HF1 OIL FLOW CHART
    • WORKSHOP MANUAL CORRECTION 6H REAR OIL SEAL REMOVAL
    • UNPLUGGED HOLE IN GUARD
    • DIESEL 4JX1 ENGINE OIL SPECIFICATION
    • 1998 DIESEL 4JX1 ENGINE VALVE CLEARANCE ADJUSTING TOOL
    • DIESEL 4JX1 ENGINE OIL SPECIFICATION
  • GROUP 6C - ENGINE MANAGEMENT
    • DATA LINK CONNECTOR
  • GROUP 6K - ENGINE COOLING
    • ENGINE COOLANT
    • COOLING FAN CHANGE
    • WORKSHOP MANUAL CORRECTION - WATER PUMP LUBE SYSTEM
    • WORKSHOP MANUAL CORRECTION - WATER PUMP REPLACEMENT
    • RADIATOR COOLING FAN
  • GROUP 6M - ENGINE FUEL SYSTEM
    • 6SD1 ENGINE FUEL INJECTION PUMP
  • GROUP 7A - MANUAL TRANSMISSION AND CLUTCH
    • CLUTCH PRESSURE PLATE LEVER HEIGHT
    • CLUTCH PEDAL SQUEAK
    • CLUTCH PEDAL ADJUSTMENT HIEGHTS
  • GROUP 7B - AUTOMATIC TRANSMISSION
    • JATCO AUTO TRANS DIAGNOSTIC FORM
  • GROUP 8 - FUEL TANK & EXHAUST
    • CREW CAB FUEL FILLER NECK AND HOSE
  • GROUP 9 - STEERING
    • STEERING DAMPER KITS
  • GROUP 10 - WHEELS & TYRES
    • TYRE DURABILITY
  • GROUP 12 - ELECTRICAL GENERAL
    • IMMOBILISER AND KEYLESS ENTRY
  • GROUP 14 - SPECIAL TOOLS
    • TAPPET ADJUSTING KIT - MANDATORY SPECIAL TOOL
    • MANDATORY SPECIAL TOOL KIT DISTRIBUTION