holden.wiki

• MODEL SELECTION INDEX
• MY 2005 VZ Series - Service Information
• Section 7A3Clutch – GEN III V8
  • 1 General Information
    • 1.1 Self Adjusting Clutch Pressure Plate
    • 1.2 Clutch Control
      • Arrangement
      • Operation
      • Clutch Master Cylinder Operation
      • Clutch Actuating Cylinder Operation
  • 2 Service Operations
    • 2.1 Service Warnings, Cautions and Notes
    • 2.2 Fluid Level Check
    • 2.3 Clutch Hydraulic System, Bleed
    • 2.4 Clutch Fluid – Change
    • 2.5 Clutch Master Cylinder
    • 2.6 Clutch Actuating Cylinder
      • Remove
      • Disassemble
      • Clean and Inspect
      • Reinstall
    • 2.7 Clutch Throwout Bearing
      • Remove
      • Clean and Inspect
      • Reinstall
    • 2.8 Clutch Pedal Assembly
    • 2.9 Clutch Cruise Control Cancel Switch
    • 2.10 Clutch and Pressure Plates
      • Remove
      • Inspect
      • Clutch Pressure Plate Adjustment
      • Reinstall
    • 2.11 Engine Flywheel
      • Replace
    • 2.12 Ring Gear
      • Replace
    • 2.13 Crankshaft Spigot Bearing
      • Replace
  • 3 Diagnosis
  • 4 Specifications
  • 5 Torque Wrench Specifications
  • 6 Special Tools