FITTING INSTRUCTIONS FOR

FRONTERA

NUDGE BAR.

Part Number 92142450

Page1of2

FD1063-1

HOLDEN SERVICE PARTS OPERATIONS

Reproduction in whole or part

prohibited without written approval

Division of HOLDEN Ltd ACN 006 893 232

FD1063

24JA02

Reproduction in whole or part

prohibited without written approval

NUDGE BAR

TORQUE 44Nm

NUT

(4 PLACES)

BOLT

(4 PLACES)

1. Free the packaging around the Nudge Bar mounting tabs. Do not remove the packaging from the rest of the Nudge Bar as

to prevent possible damage to the bar during fitment.

2. Offer the Nudge Bar up to the vehicle and fit the four M10 x 40 bolts and M10 Nut / Washer Assembly as shown per the

diagram. Finger tighten the fasteners.

3. Align the Nudge Bar to the vehicle and the torque nut and bolts to 44Nm.

4. Remove remaining packaging from Nudge Bar.

6. Place fitting instructions in glove box.

5. Check mounting location of licence plate to ensure of meeting state legal requirements. If required, fit to nudge bar by

drilling mounting holes, using licence plate as a template.

NOTE

: Re-check torque of nuts after two weeks of driving.

TOOLS REQUIRED

17mm Socket, 17mm Ring Spanner, Torque Wrench.

Page2of2

HOLDEN SERVICE PARTS OPERATIONS

FD1063

24JA02

PART No. DESCRIPTION QTY

92142450 NUDGE BAR 1

M10 X 1.5p NUT WASHER ASM. 4

M10 X 40 GRADE 8.8 BOLTS 4

FD1063 FITTING INSTRUCTION BOOKLET 1

FRONTERA NUDGE BAR PACKAGE

92142450

PARTS LIST

FITTING INSTRUCTIONS