Audio Installation Guide 2000 Monterey

ATTACHMENT TO ENGINEERING BULLETIN _______________

Eurovox Kit: 92074589 Page 1 of 2

KIT CONTENTS:

ITEM EUROVOX PART NUMBER

1. 6 DISC CD CHANGER 1060

2. CD MOUNTING BRACKET BIS67

3. CD LEAD 420-0097-0003

EXTRAS:

2 – 8g x 1½” SELF TAPPING SCREW 4 – M4 x 10mm CD SCREW ASSEMBLY

2 - M5 x 12mm RHMT, M5 FLAT WASHER, M5 NUT

INSTALLATION PROCEDURES:

REMOVE RADIO

1. Remove centre console (4 screws).

2. Remove radio surround (3 screws and clips).

3. Remove 2 screws securing right hand dash panel.

4. Remove 2 screws securing radio mounting brackets and lift unit forward [Fig 1].

5. Route CD to steering column and refit radio.

6. Refit surround and console.

7. Connect CD lead to radio CD extension and cable tie to bracket [Fig 2].

8. Remove drivers side kick trim, front and rear floor sill panels and rear luggage compartment side panel.

9. Route lead to driver’s side kick trim and continue along door sill to rear luggage compartment [Figs 3 & 4].

10. With luggage compartment side panel removed, place mounting bracket into position and mark 4 mounting

holes and large hole. Drill 4 X 6mm holes for mounting holes and 1 X 25mm hole [Fig 5].

11. Mount bracket to panel via nuts and bolts at front holes only.

12. Route CD lead through large hole of panel and refit panel. Drill 2 X 3mm holes at rear holes of mounting bracket

and screw self-tapping screws to secure bracket.

13. Connect CD lead to CD Changer flylead and mount CD to bracket, using screws provided [Fig 6].

14. Refit all previously removed panels.

15. Test all functions.

Eurovox No. Issue No. Authorised Date

EIG109 2Colin Moreland 10/12/01