FITTING INSTRUCTIONS
1. Remove the head restraint assembly and 'elevate' seat to the highest position.
2. Insert the head restraint mounting assembly through 2 holes in the front of the seat insert upper.
3. Fit the head restraint and the front seat insert to the seat back Refer. View A, Page 2.
4. Feed the fastening buckles through between the seat cushion and the seat back. Fit the seat
cushion section into position ensuring to tuck 20 to 30mm in between the seat cushion and the
seat back. Refer Section A-A, Page 2.
5. Feed the front fastening buckles under the seat cushion, above and over all adjustments and wiring
assemblies. Refer View B, Page 2.
6. Fasten the buckles and tension by pulling loose end of fastening strap. Tuck the excess tape out of
sight.
7. Some periodic adjustment and re-tensioning may be required to maintain the best fit.
8. Repeat the fitting procedure to the opposite seat. Place the fitting instructions in the glove box of
the vehicle
WASHING INSTRUCTIONS
Dry cleaning recommended.
Hand wash with approved wool detergents. Do not soak for prolonged periods.
Rinse and gentle spin (fleece out) dry away from direct heat, preferably flat in shaded area.
While still damp, gently pull into shape and brush with a coarse stiff brush to restore pile.
FITTING INSTRUCTIONS FOR
TS ASTRA & TT ZAFIRA FRONT SEAT INSERTS
Part No. 92144277
COPYRIGHT
Page 1 of 2
FD1021-01
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FD1021
06AP01
Page 2 of 2
FD1021-02
HOLDEN SERVICE PARTS OPERATIONS
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
VIEW A
VIEW B
ROUTE FASTENING CLIPS
UNDER THE SEAT, ABOVE
ALL MECHANISMS AND
WIRING ASSEMBLIES
A-A
SECTION
SEAT BACK
SEAT
CUSHION
SEAT
INSERT
TUCK 20-30mm OF SEAT
INSERT IN BETWEEN SEAT
CUSHION AND SEAT BACK
FRONT
A
B
FRONT SEAT
INSERT UPPER
FRONT SEAT
INSERT LOWER
A
A
FITTING INSTRUCTIONS FOR
TS ASTRA & TT ZAFIRA FRONT SEAT INSERTS
DESCRIPTION QTY
COVER INSERT 2
FITTING INSTRUCTIONS - FD1021 1
PARTS LIST
FD1021
06AP01