FITTING INSTRUCTIONS FOR
JS VECTRA SERIES II WAGON
MUDFLAPS - FRONT
Part Number 92142848
FD940
20AU99
COPYRIGHT
Page 1 of 2
FD940-1
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
GL
GL
PARTS LIST
DESCRIPTION QTY
Mudflap RH
Mudflap LH
Screw - Self Tapping
Scrivet
Template
1
1
4
2
1
COPYRIGHT
Page 2 of 2
FD940-2
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FD940
20AU99
JS VECTRA SERIES II WAGON
MUDFLAPS - FRONT PACKAGE
FITTING INSTRUCTIONS
1. Remove front road wheel.
2. Pierce marked holes on template provided, then align and tape to mudflap. Mark hole centres and
remove template. Drill 4.0mm dia. holes at points 'A' & 'B' (Figure 1).
3. Locate mudflap to ensure correct alignment position on vehicle and as a template, mark holes, 'A"
on front fender, 'B' on body side skirt and 'C' on wheel house liner (Figure 2). Note: Ensure hole
'A' is centally located on the sheet metal flange of the front fender.
4. Drill 2.5mm dia. hole at point 'A' and 'B' and 6.0mm dia. at point 'C' (Figure 3). Note: Hole drilled
at point 'A' in front fender to be coated with zinc chromate for corrosion protection.
5 Locate mudflap into position and fix by pushing in scrivet at point 'C'. Install self tapping screws (2
places) at point 'A' and 'B'. Tighten screws securely (Figure 4).
6. Refit road wheel .
A
B
C
A
B
4.0 mm
DIA. HOLE
TEMPLATE
4.0 mm
DIA. HOLE
Tools Required
Power drill, 2.5mm drill, 4.0mm drill, 6.0mm drill, scribing tool, Philips head screw driver and adhesive.
tape.
FIGURE 1
FIGURE 3 FIGURE 4
JS VECTRA WAGON
FRONT MUD FLAP
RIGHT HAND
JS VECTRA WAGON
FRONT MUD FLAP
LEFT HAND
SELF TAPPING
SCREW
(2 PLACES)
MARK
HOLE
LOCATION
CENTRALLY
ON METAL
FLANGE
MARK
HOLE
LOCATION
MARK
HOLE
LOCATION
A
B
C
DRILL 2.5 mm
DIA.HOLE .
APPLY ZINC
CHROMATE
TO HOLE ON
METAL
FLANGE.
DRILL 2.5 mm
DIA. HOLE
DRILL 6.0 mm
DIA. HOLE
SCRIVET
PUSH IN
TO INSTALL
FIGURE 2