FITTING INSTRUCTIONS FOR
JS VECTRA SERIES II WAGON
MUDFLAPS - REAR.
Part Number 92142844
FD941
12AU99
COPYRIGHT
Page 1 of 2
FD941-1
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
VV
16 16
2.2
2.2
V E C T R AV E C T R A
GL
GL
PARTS LIST
DESCRIPTION QTY
Mudflap RH
Mudflap LH
Screw - Self Tapping
Template
1
1
4
1
Page 2 of 2
FD941-2
COPYRIGHT
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FD931
12AU99
JS VECTRA SERIES II WAGON
MUDFLAPS - REAR PACKAGE
FITTING INSTRUCTIONS
1. Remove rear road wheel.
2. Pierce marked holes on template provided, then align and tape to mudflap. Mark hole centres and
remove template. Drill 4.0 mm dia. holes at points 'A' & 'B' (Figure 2).
3. Using Torx T25 screw driver, remove screw retaining rear bumper facia to quarter panel (Figure 2).
4. Locate mudflap to ensure correct alignment position on vehicle and as a template, mark holes, 'A'
on quarter panel and 'B' on rear bumper facia skirt (Figure 2). Note: Ensure hole 'A' is centrally
located on sheet metal flange of quarter panel.
5. Drill 2.5mm dia. hole at point 'A' and 'B' (Figure 3). Note: Hole drilled at point 'A' in quarter panel
to be coated with zinc chromate for corrosion protection.
6. Locate mudflap into position and fix to rear bumper facia by re-using Torx screw. Install self
tapping screws at point 'A' in rear quarter panel and point 'B' in rear bumper facia skirt (Figure 4).
Tighten screws securely.
7. Refit rear road wheel .
Tools Required
Power drill, 2.5mm drill, 4.0mm drill, scribing tool, Torx T25 and Philips head screw drivers and
adhesive. tape.
FIGURE 3 FIGURE 4
A
A
A
A
B
BB
B
4.0 mm
DIA. HOLE
TEMPLATE
BUMPER
FACIA
SKIRT
BUMPER
FACIA
REMOVE
TORX
SCREW
RE-INSTALL
TORX SCREW
SELF TAPPING
SCREW
(2 PLACES)
HOLE
LOCATION
MARK
HOLE
LOCATION
MARK
CENTALLY
ON METAL
FLANGE
4.0 mm
DIA. HOLE
DRILL 2.5 mm
DIA. HOLE.
APPLY ZINC
CHROMATE
TO METAL
FLANGE.
DRILL 2.5 mm
DIA. HOLE.
FIGURE 1 FIGURE 2
JS VECTRA WAGON
REAR MUD FLAP
RIGHT HAND
JS VECTRA WAGON
REAR MUD FLAP
LEFT HAND