FITTING INSTRUCTIONS FOR
VY GARAGE DOOR REMOTE HOLDER KIT
PART NO. 92145104
COPYRIGHT
Page 1 of 3
G702
Reproduction in whole or part
prohibited without written approval
FD1078
26AU02
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd ACN 006 893 232
Page 2 of 3
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
TOOLS REQUIRED:
Flat-blade Type Screwdriver
FITTING INSTRUCTIONS:
1. Using a flat bladed screwdriver, Remove sunglass
storage compartment by prising the pivot pins out
from each side of the console. Refer Figure 1.
2. Install the new remote control cover by snap fitting
the pivot pins into the console. Refer Figure 2.
3. Check the location of the remote controller
mounting position on the console, which is
located between theconsole mounting holes.
Refer Figure 3.
4. Peel off the protective backing from the velcro
mounting pad and centrally attach it to the console.
Peel off the other protective backing and attach
the remote controller to the adhesive pad. Press
down firmly to ensure positive adhesion. Refer
Figure 3.
NOTE: It may be necessary to check the alignment
of the remote controller's position relative to the
switch pads on the console cover, prior to removing
the protective backing.
FIGURE 1
FIGURE 2
FIGURE 3
SUNGLASS
HOLDER
LEVER PIVOT
PINS OUT
VELCRO
MOUNTING
PAD
REMOTE SWITCH
COVER PANEL
INSERT
PIVOT PINS
FITTING INSTRUCTIONS FOR
VY GARAGE DOOR REMOTE HOLDER KIT
G702
FD1078
26AU02
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd ACN 006 893 232
Page 3 of 3
FIGURE 4
5. Install switch activating posts on the cover to align
with the remote controller buttons. Check operation
of the controller by closing the switch panel and
operating the switch pads. Adjust if necessary with
the various lengths supplied to suit the
different controller switch positions.
Some experimentation with positions may be
required to gain the optimum
configuration . Refer Figure 4
6. Place the fitting instructions in the vehicle's glove
box.
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
FD1078
26AU02
PART NUMBER DESCRIPTION QUANTITY
92145104 CONSOLE COVER PANEL 1
ADHESIVE MOUNTING PAD 1
ACTIVATING POST - SHORT 3
ACTIVATING POST - MEDIUM 3
ACTIVATING POST - LONG 3
FD1078 FITTING INSTRUCTIONS 1
PARTS LIST
FITTING INSTRUCTIONS FOR
VY GARAGE DOOR REMOTE HOLDER KIT
ACTIVATING
POSTS
REMOTE
CONTROLLER
VY GARAGE DOOR REMOTE HOLDER KIT
G702
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd ACN 006 893 232