TOOLS REQUIRED
Phillips head screw driver, Power Drill, Twist Drill 2mm.
FITTING INSTRUCTIONS
1. Remove existing screw (Item 1) from facia wheelhouse flange and discard (Location A).
2. Place mud flap in position and attach by using the screw from the mud flap package (Item 1).
3.
4.
5.
6.
Firmly holding mud flap in position and using it as a template, drill through mud flap into fascia
and install self tapping screw (Item 2, 2 places) using dimples as hole locations.
Refit rear road wheel.
Repeat for opposite side.
Place fitting instructions in glove box.
FITTING INSTRUCTIONS FOR
COMMODORE SEDAN MOULDED REAR MUD FLAPS
Part No. 92144138
FD1082
13AU02
Page 1 of 1
COPYRIGHT
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of General Motors - Holden's Automotive Limited ACN 006 893 232
G707
PARTS LIST
DESCRIPTION QTY
MUD FLAP RH
MUD FLAP LH
SCREW SELF TAPPING
1
1
6
SELF TAPPING
SCREW
(3 PLACES)
DRILL PILOT HOLE
2mm DIA
DRILL PILOT HOLE
2mm DIA
MUD FLAP
FASCIA SKIRT
A
C
B
1
2
1
1
1.0~3.0 Nm
2