HOLDEN LTD
Division of HOLDEN Ltd ACN 006 893 232
FD1084
18OC04
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
TOOLS REQUIRED
Phillips head screw driver, Power Drill, Twist Drill 2mm.
FITTING INSTRUCTIONS
1. Remove existing screw (Item 1) from facia wheelhouse flange and discard (Location A).
2. Place mud flap in position and attach by using the screw from the mud flap package (Item 1).
3.
4.
6.
NOTE: If fitting to VZ S or SS utes a 2mm pilot hole is to be drilled 10mm below the centerline of the
top mudflap hole position.
Firmly holding mud flap in position and using it as a template, drill through mud flap into fascia
and install self tapping screw (Item 2, 2 places) using dimples as hole locations.
Repeat for opposite side.
Place fitting instructions in glove box.
FITTING INSTRUCTIONS FOR
VY ‘S’ & ‘SS’ SEDAN MOULDED REAR MUD FLAPS
Part No. 92144141
Page 1 of 1
PARTS LIST
DESCRIPTION QTY
MUD FLAP RH
MUD FLAP LH
SCREW SELF TAPPING
1
1
6
SELF TAPPING
SCREW
(3 PLACES)
DRILL PILOT HOLE
2mm DIA
DRILL PILOT HOLE
2mm DIA
MUD FLAP
FASCIA SKIRT
A
C
B
1
2
1
1
1.0~3.0 Nm
2