TOOLS REQUIRED
Phillips head screw driver, Power Drill, Twist Drill 2mm dia.
FITTING INSTRUCTIONS
1. Place mud flap in position and drill a 2.0mm dia. pilot hole at location A, using the mud flap as a template.
Attach the mud flap using the screw (Item 1).
2.
3.
4.
Firmly holding mud flap in position and using the dimples in bosses at locations B & C, drill a
2.0mm dia. pilot hole through the mud flap into the fascia. Install the self tapping screw and tighten
to specified torque (Item 2, 2 places).
Repeat procedure for the opposite side.
Place the fitting instructions in the glove box.
FITTING INSTRUCTIONS FOR
VY WAGON REAR MUD FLAPS
Part No. 92144140
FD1085
09SE01
Page 1 of 1
COPYRIGHT
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of General Motors - Holden's Automotive Limited ACN 006 893 232
G707
PARTS LIST
DESCRIPTION QTY
MUD FLAP RH
MUD FLAP LH
SCREW SELF TAPPING
1
1
6
11.0~3.0 Nm
SELF TAPPING
SCREW
(3 PLACES)
MUD FLAP
FASCIA SKIRT
A
C
B
1
2
1
2
DRILL PILOT HOLE
2.0mm DIA
DRILL PILOT HOLE
2.0mm DIA
DRILL PILOT HOLE
2.0mm DIA