PARTS LIST
DESCRIPTION QTY
SCREW
‘U’ NUT
CLIP
CAP
BASE
1
1
1
1
1
2.5 - 3 Nm
1. Prior to installing fit rubber gaskets as shown.
Fit the large double sided tape gasket with care
Refer Figure 1.
2. Using a flat blade carefully prise console
components apart slightly.
Ref Figure 2.
3. With console components held slightly apart, fit
metal clip as shown in Figures 3 & 5 being careful
to align the clip, central to the console join line.
4. Engage phone holder base to metal clip.
Refer Figure 5.
Hold phone base in place whilst assembling cap to
phone base using screw and ‘U’ nut provided.
Refer Figures 4 & 5.
5. Fit mobile phone bracket, drill & screw into the cap.
Drill clearance holes for screws in base moulding.
Refer Figure 5.
Caution
Ensure drilling does not mark console body.
CAP
‘U’ NUT
SCREW
CLIP
BASE
CONSOLE
CLIP
‘U’ NUT
CAP
SCREW
BASE
LARGE
GASKET
SMALL
GASKET
SMALL
GASKET
ASSEMBLY
CONDITION
SMALL GASKET 2
LARGE GASKET 1
FITTING INSTRUCTIONS FOR VY
MOBILE PHONE HOLDER
Part Number 92144493
CONSOLE
JOIN LINE
FD1093
29JA03
COPYRIGHT
Page 1 of 1
G781
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
1
1
1