1. Turn the road wheel to ease fitting the mudflap.

2. Remove and retain the two fender liner screws from the plastic skirt (item 1).

3. Firmly fix mud flap and fender liner at lower two locations using retained screws . Ensure neat

fit of mud flap against fender and plastic skirt.

4. Push loosened fender liner away to provide access to fit upper clips (mud flap to fender).

5. Ensure rib on top inner edge of mud flap aligns with inner edge of fender, before attaching two

clips, Refer View A.

7. Using the dimple in the mudflap boss, drive the self tapping screw supplied through the boss and into

the plastic skirt.

8 Tighten all screws to specified torque.

9. Repeat for the opposite side of the vehicle.

10. Place fitting instructions in the vehicles glove box.

the the the

the the

FITTING INSTRUCTIONS FOR

WK STATESMAN

FRONT MUD FLAPS

Part No. 92144133

& CAPRICE

MOULDED

FD1126

24JA03

HOLDEN SERVICE PARTS OPERATIONS

Reproduction in whole or part

prohibited without written approval

Division of General Motors - Holden's Automotive Limited ACN 006 893 232

Page 1 of 1

G742

11.0~3.0 Nm

FITTING INSTRUCTIONS:

TOOLS REQUIRED:

Phillips Head Screw Driver

FENDER

MUD FLAP

VIEW A

CLIP

(2 PLACES

EACH SIDE)

ALIGN MUD FLAP RIB

WITH INNER EDGE

OF FENDER

SELF TAPPING

SCREW

(2 PLACES -EXISTING)

SELF TAPPING SCREW

(SUPPLIED)

CLIP

(2 PLACES)

MUD FLAP

BOSS &

DIMPLE

PARTS LIST

PART No. DESCRIPTION QTY

MUD FLAP - RH FRONT 1

MUD FLAP - LH FRONT 1

SELF TAPPING SCREWS 2

CLIPS 4

FD1126 FITTING INSTRUCTION 1