TOOLS REQUIRED
Phillips head screw driver.
FITTING INSTRUCTIONS
1. Remove the existing screw (Item 1) from facia wheelhouse flange and retain (Location A).
2. Place mud flap in position and attach using the retained screw (item 1). Ensure screw is
fully tightened to ensure correct positioning of mudflap.
3.
4.
5.
the
the the
the the
Firmly holding the mud flap in position and the using dimples in the mudflap bosses as hole
locators, drive the self tapping screws through the mud flap into the plastic fascia
(item 2, 2 places).
Repeat for opposite side.
Place fitting instructions
in the vehicle glove box.
FITTING INSTRUCTIONS FOR
WK STATESMAN & CAPRICE MOULDED REAR MUD FLAPS
Part No. 92144142
FD1127
24JA03
Page 1 of 1
COPYRIGHT
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of General Motors - Holden's Automotive Limited ACN 006 893 232
G742
11.0~3.0 Nm
SELF TAPPING
SCREW
(2 PLACES)
MUD FLAP
FASCIA SKIRT
A
1
2
1
2
SELF TAPPING
SCREW
(EXISTING) 1
PARTS LIST
PART No. DESCRIPTION QTY
MUD FLAP - RH REAR 1
MUD FLAP - LH REAR 1
SELF TAPPING SCREWS 4
FD1127 FITTING INSTRUCTION 1