FITTING INSTRUCTIONS FOR
VY UTE REGULAR CAB CHASSIS
TRAILER HARNESS
Part Number 92605960
COPYRIGHT
Page 1 of 4
G797
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FD1153
17AP03
TRAILER HARNESS INSTRUCTIONS
COPYRIGHT
Page 2 of 4
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FITTING INSTRUCTIONS:
1. Disconnect the existing right-hand side tail light
connector. Refer Figure 1.
NOTE: Fit tray and tail lights to vehicle tray before
installing the trailer harness.
2. Remove the grey blanking plug from the vehicle
harness connector. Refer Figure 1.
3. Connect the trailer harness tail light connector to the
existing right-hand side tail light connector.
Refer Figure 2.
4. Connect the corresponding trailer harness connector
to the original vehicle harness tail light connector. Refer
Figure 2.
5. Connect the trailer harness grey connector to the
vehicle harness grey connector. Refer Figure 2.
6. Secure the trailer harness tail light connector to the tray
support bracket with the xmas tree clip fitted.
Refer Figure 2.
TOOLS REQUIRED:
Phillips Head Screwdriver.
FIGURE 2
FIGURE 1
G797
REAR TRAY
SUPPORT
TRAILER
HARNESS
EXISTING RIGHT-HAND SIDE
TAIL LIGHT CONNECTOR
EXISTING VEHICLE TAIL LIGHT
HARNESS CONNECTOR
EXISTING VEHICLE
HARNESS CONNECTOR
(GREY)
REAR
CHASSIS RAIL
CROSSMEMBER
XMAS TREE
CLIP
RIGHT HAND SIDE
TAIL LIGHT
BLANKING
PLUG (GREY)
RIGHT HAND SIDE
TAIL LIGHT CONNECTOR
FD1153
17AP03
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd ACN 006 893 232
Page 3 of 4
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
FITTING INSTRUCTIONS:
7. Secure the trailer harness 7-Pin connector to the
towbar mounting plate using M5 bolts, spring
washers and M5 nuts (2 places). Torque to
specifications. Refer Figure 3.
8. Secure the trailer harness with two long cable ties as
shown. Refer Figure 4.
FIGURE 3
FIGURE 4
G797
CABLE
TIE
CABLE
TIE
TRAILER
HARNESS
M5
NUT
SPRING
WASHER
TRAILER
HARNESS
PLUG
M5 X 20
BOLT
TOWBAR
MOUNTING
PLATE
18-11 Nm
1
FD1153
17AP03
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd ACN 006 893 232
Page 4 of 4
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
G797
VY CAB CHASSIS TRAILER HARNESS
PARTS LIST
PART NUMBER DESCRIPTION QUANTITY
92605960 TRAILER HARNESS 1
HEX BOLT - M5 X 20 2
HEX NUT - M5 2
FLAT WASHER 2
SPRING WASHER - M5 2
CABLE TIE - 200mm 2
CABLE TIE - 100mm 1
FD1153 FITTING INSTRUCTIONS
CABLE TIE
9. Secure the wiring harness with one short cable tie as
shown. Refer Figure 5.
10. Check for correct operation of trailer harness.
11. Place the fitting instructions in the vehicle glovebox.
FIGURE 5
TRAILER
HARNESS
VEHICLE
HARNESS
FD1153
17AP03