
FITTING INSTRUCTIONS:
5. Pass the hooks on the back of the clips (1) over the lip of
the headlight and place clips down onto the abrasive
resistant patches. Refer to Figure 4
6. Fit the two plastic clips supplied on the bottom edge of
the headlight protector. Refer to Figure 5
Refer to Figure 6 for the following:
7. Align the top edge of the headlight protector with the two
clips on the headlight and place onto the clips.
8. Position the two plastic clips on the bottom edge of the
headlight protector with the gap between the bumper
fascia and the bottom edge of the headlight. Once
aligned, push the clips into the gap.
9. Repeat the procedure on the other headlight.
10. Place fitting instructions in Glovebox.
FIGURE 5
FIGURE 4
Page 3 of 4
1
FIGURE 6
FITTING INSTRUCTIONS FOR
VZ COMMODORE HEADLIGHT PROTECTOR
FD1226
29OCT04
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
HOLDEN LTD
Division of HOLDEN Ltd ACN 006 893 232