FITTING INSTRUCTIONS FOR

VY & VZ ROCKER SILL COVER

Part No. 92143002

FD1291

02SE04

Reproduction in whole or part

prohibited without written approval

HOLDEN LTD

Division of HOLDEN Ltd ACN 006 893 232

DRAFT

Page 1 of 1

TOOLS REQUIRED:

Tape Measure.

FITTING INSTRUCTIONS:

1. Ensure vehicle rocker sills (1) are clean and dry.

2. Apply side pressure to the tabs (2) (2 places) on the reverse side of the sill cover trim (3) and snap off.

NOTE: Ensure the break is flush with the under surface of the trim.

3. Trial fit the sill cover trim, the forward end of the trim should be 10mm (4) back from the end of the inner sill trim

end (5).

4. Remove the backing tape from the sill cover trim reposition the trim on the sill. Working from one end push the

trim down firmly for several seconds to ensure permanent adhesion.

5. Repeat on other side of Vehicle.

6. Place fitting instructions in vehicle glovebox.

PARTS LIST

PART No DESCRIPTION QUANTITY

92143002 SILL ROCKER COVER KIT 1

SILL COVER 2

FD1291 FITTING INSTRUCTIONS 1