FITTING INSTRUCTIONS FOR
VT LOAD DISTRIBUTION HITCH PACKAGE(ADJUSTABLE)
FOR FITMENT WITH 2100 KG TOW BAR PACKAGE
Part No. 92140101
(supersedes M41138)
1
FD850
20AP98
Reproduction in whole or part
prohibited without written approval
COPYRIGHT
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd ACN 006 893 232
3331-01a
Page 1 of 4
Measure height of trailer or caravan coupling from centre of coupling to ground.
Trial fit equaliser header assembly to tow bar, in each of it's two positions and record the heights
of tow ball centre to ground, refer Figure 1, view B.
Insert equaliser header assembly, in the position which provides the closest tow ball height to trailer
coupling height dimension.
Secure equaliser header assembly with M16 bolt, nut and saftey clip,refer Figure 1 view A.
FD850
20AP98
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd ACN 006 893 232
Reproduction in whole or part
prohibited without written approval
COPYRIGHT
Page 2 of 4
3331-02a
ADJUSTABLE LOAD DISTRIBUTION
HITCH FITMENT INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Attach ball to equaliser header assembly, torque tow ball nut 175Nm.
Connect trailer to tow vehicle.
Locate equaliser bars to equaliser header assembly with pins. Secure pins with washers and 'R' clips,
refer Figure 1 view C.
Lubricate pins with HN1271 or muti purpose grease prior to installation.
Secure over centre latches to both sides of 'A' frame of trailer or caravan, refer Figure 1 view F.
Ensure over centre latches align with equaliser bar chains, refer Figure 1 view D.
Tighten bolt on rear of latches to 10 - 15 Nm and secure lock nut.
Lower lever arm on over centre latch so lever arm is 90 from locked.
Using the equaliser bar chain place chain link which easily locates over the spigot. Using lever bar
lift over centre latch into position. Secure with pin and 'R' clip, refer Figure 1 view E.
NOTE:
NOTE:
IMPORTANT: Refer to Owner's Manual,"Towing and Loading", for load levelling procedure and
Maximum Axle Load Ratings.
Refer to Superlift Shock Absorbers package for Maximum Pressure Rating
HOLDEN SERVICE PARTS OPERATIONS
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
COPYRIGHT
Division of HOLDEN Ltd ACN 006 893 232
FD850
20AP98
Page 3 of 4
3331-03a
Figure 1
VIEW A
VIEW C
NUT M16
(NYLOC)
SAFETY CLIP
TOW
BALL
BOLT M16 EQUALISER
HEADER
ASSEMBLY
NOTE: LUBRICATE PINS
WITH HN 1271 OR MULTI-
PURPOSE GREASE PRIOR
TO INSTALLATION PIN
(2 PLACES)
'D' SHACKLE
(2 PLACES)
WASHER M16
(2 PLACES)
'R' CLIP-SMALL
(2 PLACES)
EQUALISER BAR
(2 PLACES)
SAFTEY
CHAIN
NUT
NUT M10
(2 PLACES)
BOLT M10
(2 PLACES)
'R' CLIP
(2 PLACES)
LEVER BAR
PIN
(2 PLACES)
CHAIN
(2 PLACES)
F
VIEW E
VIEW F
VIEW B
22
POSITION OVER CENTRE LATCH
TO ALIGN WITH EQUALISER ARM
ADJUST CHAIN LENGTH TO
MAINTAIN VEHICLE IN LEVEL
POSITION.
CAUTION: MINIMUM 4 LINKS
REQUIRED BETWEEN
EQUALISER BAR AND OVER
CENTRE LATCH.
10 - 15 Nm
175 Nm
70 - 90 Nm
VIEW D
11
11
33
22
33
NOT INCLUDED IN HITCH PACKAGE
(MAY BE PURCHASED SEPARATELY)
'D' SHACKLE
(2 PLACES)
A
B
CE
D
SEDAN SHOWN
WAGON SIMILAR
PART OF TOW BAR PACKAGE
GROUND
LEVEL
MAXIMUM
TOW BALL
HEIGHT
MINIMUM
TOW BALL
HEIGHT
INSERT EQUALISER HEADER IN POSITION
WHICH IS CLOSEST TO TRAILER
COUPLING HEIGHT(WHEN LEVEL)
HOLDEN SERVICE PARTS OPERATIONS
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
COPYRIGHT
Division of HOLDEN Ltd ACN 006 893 232
VT LOAD DISTRIBUTION HITCH PACKAGE
92140101 (supersedes M41138)
PARTS LIST
PART NUMBER DESCRIPTION QUANTITY
EQUALISER HEADER ASSEMBLY
OVER CENTRE LATCH
BOLT - M10 X 75mm - LOCATION OVER CENTRE LATCH
NUT M10 - LOCATION OVER CENTRE LATCH
EQUALISER BAR
PIN 16mm X 110mm - LOCATION OF EQUALISER BAR
TO EQUALISER HEADER ASSEMBLY
FLAT WASHER 16mm - LOCATION OF EQUALISER BAR
TO EQUALISER HEADER ASSEMBLY
CLIP 'R' SMALL - LOCATION OF EQUALISER BAR TO
EQUALISER HEADER ASSEMBLY
CHAIN - EQUALISER BAR TO OVER CENTRE LATCH
'D' SHACKLE - CHAIN TO EQUALISER BAR
LEVER BAR
PIN - LOCATING SWING ARM OVER CENTRE LATCH
CLIP 'R' - LOCATION SWING ARM OVER CENTRE LATCH
WARRANTY CARD
FITTING INSTRUCTIONS BOOKLET
FD796
FD850
1
2
2
2
2
2
2
2
2
2
1
2
2
1
1
FD850
20AP98
Page 4 of 4
3331-04a
PARTS NOT INCLUDED IN HITCH PACKAGE
(MAY BE PURCHASED SEPARATELY)
PART NUMBER DESCRIPTION
92140068 TOW BALL ASSEMBLY (CHROME)
92140106 TOW BALL COVER