FITTING INSTRUCTIONS FOR
PROTECTIVE WRAP (Part No. 92078978)
TO FRONT SERVICE LINE (Part No. 92141583),
VT SEDAN AFTERMARKET LPG PACKAGE
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
COPYRIGHT
FD899
29OC98
Division of HOLDEN Ltd ACN 006 893 232
Page 1 of 1
G141-1
FITTNG INSTRUCTIONS
1. Locate the 3rd bend from converter end of front service
line.
2. Mark the service line 35mm from the centre point of
this bend, as shown above.
3. Fit protective wrap around service line beginning at
point marked. Secure protective wrap using "Velcro"
strip, as shown in step 1.
4. Peel backing paper from adhesive strip, as shown in
step 1.
5. Secure protective wrap firmly around service line,
taking care not to tear protective wrap, and secure
using adhesive strip, refer steps 2 and 3.
STEP 1
STEP 2
STEP 3
1ST BEND
2ND BEND
3RD BEND
35MM
TO CONVERTER
TO INTERMEDIATE
SERVICE LINE
PROTECTIVE WRAP
(INSTALLED CONDITION)
PROTECTIVE WRAP
FITTING PROCEDURE
FRONT SERVICE LINE
PEEL BACKING
PAPER FROM
ADHESIVE STRIP
FIT PROTECTIVE
WRAP AROUND
SERVICE LINE AND
ATTACH "VELCRO"
STRIP
FIT PROTECTIVE WRAP
FIRMLY AROUND SERVICE
LINE
SECURE PROTECTIVE WRAP
USING ADHESIVE STRIP