1. Remove front road wheel. Refer Owner’s Handbook for correct procedure .
2. Remove and discard two fender liner screws, from plastic skirt.
3. Remove upper fender liner screw from steel fender and retain.
4. Firmly fix mud flap and fender liner at lower two locations using larger screws supplied in
package. Ensure neat fit of mud flap against fender and plastic skirt.
5. Push loosened fender liner away to provide access to fit upper clips (mud flap to fender)
6. Ensure rib on top inner edge of mud flap aligns with inner edge of fender, before attaching two clips,
Refer View A.
7. Replace upper fender liner screw
8. Refit front road wheel.
9. Repeat for opposite side..
10. Place fitting instructions in glove box
FITTING INSTRUCTIONS FOR
VX COMMODORE “
FRONT MUD FLAPS
Part No. 92143000
S” & “SS” & V2 COUPE “MONARO”
COPYRIGHT
FD950
10SE01
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of General Motors - Holden's Automotive Limited ACN 006 893 232
Page 1 of 1
FD950-1
SELF TAPPING
SCREW
(2 PLACES)
REMOVE EXISTING
UPPER FENDER
LINER SCREW
CLIP
(2 PLACES)
MUD FLAP
FENDER
MUD FLAP
VIEW A
CLIP
(2 PLACES
EACH SIDE)
ALIGN MUD FLAP RIB
WITH INNER EDGE
OF FENDER
A
PARTS LIST
PART No DESCRIPTION QTY
92144125
92144126
MUD FLAP RH
MUD FLAP LH
SCREW SELF TAPPING
CLIP
1
1
4
4
1
1
1.0~3.0 Nm