
HOLDEN SERVICE PARTS OPERATIONS
Division of Holden Ltd ACN 006 893 232
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
c
Page 2 of 4
FITTING INSTRUCTIONS
HEADLIGHT PROTECTORS
1. Open bonnet and clean headlights.
3. Trial fit the metal clips onto headlight at
the previously noted positions and note
where the clip makes contact with
headlight lens. Remove the metal clips.
See Figure.2
4. Clean the noted clip positions on headlight
with alcohol wipe provided and wipe away
any residue with a dry clean cloth. Adhere
the abrasive resistant tape to these areas.
See Figure.3
FIG. 3
FIG. 2
H2613
5 August 02
2. Trial fit the Headlight Protector onto the
headlight and note the positions on
headlight corresponding to slots in Head-
light Protector, remove Headlight Protec-
tor. See Figure. 1
FIG.1
1
2