TOOLS REQUIRED

Rubber Head Mallet,

FITTING INSTRUCTIONS

1. With a rubber mallet, carefully drive the exhaust

extension over the exhaust pipe. Maintain a

clearance of 22mm from the end of the Stainless

Steel Extension to the end of the exhaust pipe.

Refer Figures 1 and 2.

NOTE: If a rubber mallet is not available, use a

hammer and a piece of wood (or similar) to

protect the stainless steel extension.

2. Place the fitting instructions in the glove box.

FITTING INSTRUCTIONS FOR

TS HOLDEN ASTRA (1.8Lt)

STAINLESS STEEL EXHAUST PIPE EXTENSION

Part No. 92146296

HOLDEN SERVICE PARTS OPERATIONS

Reproduction in whole or part

prohibited without written approval

Division of General Motors - Holden Limited ACN 006 893 232

G795

PART No. DESCRIPTION QTY

92146296 STAINLESS STEEL EXTENSION 1

FD1150 FITTING INSTRUCTIONS 1

PARTS LIST

Page 1 of 1

FD1150

12MA03

22mm

STAINLESS STEEL

EXHAUST EXTENSION

EXHAUST PIPE

FIGURE 1

STAINLESS STEEL

EXHAUST EXTENSION

EXHAUST PIPE

FIGURE 2