FD876

18MY98

COPYRIGHT

Page 1 of 1

FITTING INSTRUCTIONS FOR

TS ASTRA SEAT COVERS

Part Number 92141471

G54-1

HOLDEN SERVICE PARTS OPERATIONS

Reproduction in whole or part

prohibited without written approval

Division of HOLDEN Ltd ACN 006 893 232

SAFETY NOTICE

Seat covers NOT suitable for vehicles with

Side Impact Air Bag Protection

Some adjustment may be required to

achieve the best contoured fit.

FITTING INSTRUCTIONS

1. Elevate seat to highest position.

2. Locate back rest section of the seat

cover and pull firmly into position over

the headrest and backrest of seat.

3. Feed the fastening buckle through

centre of seat and position seat section

in place tucking 20 - 30mm between

seat and backrest. Reshape as

necessary.

4. Use wire hook supplied to feed seat side

loops between plastic seat trim and seat

assembly to the under side of seat

ensuring to clear all seat adjustments.

5. Feed front fastening clip under seat and

from the back of the seat, feed buckle

section through back rest loop and seat

side loops, clip together and tension.

NOTE: Arm rests are required to be

removed then replaced after fitting has been

completed.

WASHING INSTRUCTIONS

Hand wash with approved wool detergents,

do not soak for prolonged periods.

Rinse and gentle spin (fleece out) dry away

from direct heat, preferably flat in shaded

area.

While still damp, gently pull into shape and

brush with a coarse stiff brush to restore

pile.

Dry cleaning recommended.

BACKREST LOOP

SEAT SIDE LOOP

SEAT

SIDE

LOOP

FASTENING CLIP

FASTENING BUCKLE