1. Remove rear road wheel.

2. Remove and discard wheelhouse liner lower fastening screw.

3. Fit mounting bracket (bevelled corners downward) using self tapping screw supplied in the

package.

4. Place mud flap in position. Align lower mounting hole in bracket and mark position of

centre mounting hole on bumper and upper mounting hole on wheel arch flange. Drill two 5,0mm

dia. holes, one in bumper and one in wheel arch flange. Repeat for opposite side.

5. Loosen upper wheelhouse liner fastening screw and fit two 'U' nuts.

6. Fasten mud flap securely using self tapping screws supplied in package.

7. Refit rear road wheel.

FITTING INSTRUCTIONS FOR VT COMMODORE

REAR MUD FLAPS, WAGON

Part No. 92140095

FD936

26MY99

HOLDEN SERVICE PARTS OPERATIONS

Reproduction in whole or part

prohibited without written approval

Division of General Motors - Holden's Automotive Limited ACN 006 893 232

Page 1 of 1

FD936-1

SELF TAPPING

SCREW

(4 PLACES)

'U' NUT

(2 PLACES)

MUD FLAP

MOUNTING

BRACKET

DRILL 5,0MM DIA. HOLE

PART No. DESCRIPTION QTY

92140157 MUD FLAP (LH) 1

92140158 MUD FLAP (RH) 1

SP4048 SCREW, SELF TAPPING 8

SP3721 'U' NUT 4

MOUNTING BRACKET 2

PARTS LIST