1. Remove rear road wheel.

2. Remove and discard wheelhouse liner lower, front fastening screw, (location A).

3. Fit mounting bracket onto bumper, at location A, (bevelled corners downward) using self tapping

screw supplied in the package.

4. Remove and discard existing screw from bumper wheelhouse flange (location B).

5. Place mud flap in position and attach using self tapping screws 1 and 2, .

6. Use the remaining hole in mud flap (location 3), as a template to drill a 2.5 mm dia. hole in the

bumper wheelhouse flange.

7. Drill another 2.5mm dia. hole right through mud flap and bumper wheelhouse flange (location 4).

8. Fasten mud flap securely using the two remaining self tapping screws (3 and 4).

9. Refit rear road wheel.

10.

supplied in package

Repeat for opposite side.

FITTING INSTRUCTIONS FOR

VX COMMODORE REAR MUD FLAPS, SEDAN

Part No. 92142466

FD948

11MY00

Page 1 of 1

HOLDEN SERVICE PARTS OPERATIONS

Reproduction in whole or part

prohibited without written approval

Division of General Motors - Holden's Automotive Limited ACN 006 893 232

FD948-1

DESCRIPTION QTY

MUD FLAP (LH) 1

MUD FLAP (RH) 1

SCREW, SELF TAPPING 10

MOUNTING BRACKET 2

PARTS LIST

SELF TAPPING

SCREW

(5 PLACES)

MUD FLAP

ATTACH MOUNTING

BRACKET TO FRONT

SCREW LOCATION

DRILL 2.5MM DIA. HOLE THRU

MUD FLAP AND BUMPER

WHEELHOUSE FLANGE