1. Remove rear road wheel. Refer Owner’s Handbook for correct procedure.
2. Remove and discard existing screw from facia wheelhouse flange (Location A).
3. Place mud flap in position and attach using self tapping screw 1, .
4. Drill 2.0mm dia. hole in wheelhouse liner using mudflap hole (Location B) as template.
5. Install self tapping screw 2.
6. Mark out on mudflap, hole centre locations and drill 2 holes, 2.0mm dia. through mudflap and into
the facia skirt and the wheelhouse liner (Location C & D) . Refer View A
7. Fasten mud flap securely using the two remaining self tapping screws (3 and 4).
8. Refit rear road wheel.
9.
supplied in package
Repeat for opposite side.
10. Place fitting instructions in glove box
FITTING INSTRUCTIONS FOR
VX COMMODORE “S” & “SS” REAR MUD FLAPS
Part No. 92143286
FD951
21SE00
Page 1 of 1
COPYRIGHT
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of General Motors - Holden's Automotive Limited ACN 006 893 232
FD951-1
PARTS LIST
PART No DESCRIPTION QTY
92144127
92144128
MUD FLAP RH
MUD FLAP LH
SCREW SELF TAPPING
1
1
8
EXISTING HOLE
DRILL 2.0mm DIA. HOLE
THRU MUD FLAP AND
WHEELHOUSE LINER
DRILL 2.0mm DIA. HOLE
THRU MUD FLAP, FACIA
& WHEELHOUSE LINER
C
D
VIEW A
80mm
45mm
45mm
SELF TAPPING
SCREW
(4 PLACES)
MUD FLAP
FACIA SKIRT
A
B
B
1
2
3
4
A
1
1
1.0~3.0 Nm