FITTING INSTRUCTIONS FOR
WH INSECT SCREENS
Part No. 92141466
FD918
08JN99
COPYRIGHT
Page 1 of 4
FD918-1
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
INSECT SCREENS
FITMENT INSTRUCTIONS
GRILLE INSERT, INSECT SCREEN
1. Lift bonnet and secure.
2. Undo the four nuts shown from the facia grille insert , refer fig. 1, view A.
3. Position the grille insert insect screen onto the four studs at the rear of the front facia grille, ensuring
lower two brackets come out and over lip of the lower bonnet as shown, refer fig. 1, section A-A.
4. Reinstall the four nuts to secure grille insert insect screen, refer fig, 1 section A-A.
LOWER BUMPER SCOOP INSECT SCREEN
5. From front of vehicle, position the lower insect screen into the bumper scoop, refer fig. 1, view B.
Insect screen should be behind bumper scoop.
6. Ensure the two tabs are facing upwards as the screen must be positioned in front of the lower steel
flange of the bumper support beam and the plastic tabs behind the flange, refer fig. 1, section A-A.
7. With a sliding motion, position the screen centrally about the bumper scoop. Clip the body of the
clamps onto the lower section of the bumper scoop, refer fig. 1, section A-A.
8. Using the fitting kit, screw the wedge blocks into the clamps bodies so as to lock up the screen onto the
bumper, refer fig. 1, section A-A.
FD918
08JN99
COPYRIGHT
Page 2 of 4
FD918-2
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
A
A
B
VIEW A
GRILLE
INSERT
VIEW B
FD918
08JN99 FIGURE 1
COPYRIGHT
Page 3 of 4
FD918-3
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
INSECT
SCREEN
(LOWER
BUMPER
SCOOP)
METAL
BRACKET
BUMPER
SUPPORT
BEAM
PLASTIC
TAB
CLAMP
WEDGE
BOLT
WASHER
BUMPER
MOULDING
FRONT
FACIA
GRILLE
INSERT
INSECT
SCREEN
(GRILLE INSERT)
A-A
SECTION
NUT
(4PLACES)
A
NUT
NUT
BONNET
CLAMP BODY
BONNET
INSECT SCREEN
(LOWER BUMPER
SCOOP)
BOLT
(2 PLACES)
WASHER
(2 PLACES)
CLAMP WEDGE
(2 PLACES)
CLAMP BODY
(2 PLACES)
INSECT SCREEN
(GRILLE INSERT)
WH INSECT SCREENS PACKAGE
Part No. 92141466
Parts List
PART No. DESRIPTION QTY
INSECT SCREEN - BONNET GRILLE INSERT 1
INSECT SCREEN - LOWER BUMPER SCOOP 1
CLAMP BODY 2
CLAMP WEDGE 2
BOLT 2
WASHER 2
FD918 FITTING INSTRUCTION BOOKLET 1
FD918
08JN99
COPYRIGHT
Page 4 of 4
FD918-4
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232