FITTING INSTRUCTIONS FOR
WH LEFT & RIGHT REAR MUDFLAP
Part No. 92141468
FD933
09FE00
COPYRIGHT
Page 1 of 1
fd933-1a
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FIGURE 1
TOOLS REQUIRED
Screw driver - Philips Head
Power drill
Twist drill 5mm diameter.
FITTING INSTRUCTIONS
1. Remove rear road wheel.
2. Remove and discard two lower wheelhouse liner
fastening screws.
3. Fit mounting bracket as shown in Figure 1, using
two new larger screws provided in package.
4. Place mudflap in position, align lower mounting
hole with hole in bracket and mark on bumper the
position of upper two mounting holes.
5. Drill two 5mm diameter holes in bumper in the
positions previously marked then fit 'U' nuts
provided in package.
6. Fasten mudflap securely with the remaining screws
making sure that mudflap is nesting neatly against
bumper.
7. Refit rear road wheel.
Part No.
PARTS LIST
Description Qty.
Mud flap (LH)
Mud flap (RH)
Bracket (LH)
Bracket (RH)
Screw, self tapping
'U' nut
SP4048
SP1870
1
1
1
1
10
4
SCREW
(3 PLACES) 'U' NUT
(2 PLACES)
MUDFLAP BRACKET
SCREW
(2 PLACES)