Page 2 of 2

FD1008

19FE01

FD1008-2

HOLDEN SERVICE PARTS OPERATIONS

Reproduction in whole or part

prohibited without written approval

Division of HOLDEN Ltd ACN 006 893 232

1. Detach parcel shelf straps from hooks.

2. Place rear window blind on parcel shelf, with equal

margin to edge of parcel shelf each side and 35mm

back from the middle of the curved edge. Refer

Figure 1.

3. Use blind as a template to mark mounting hole

locations, 4 places. Refer Figure 1.

4. Remove blind and drill 4.0mm dia. holes, 4 places.

5. Vacuum up all swarf and debris

6. Attach blind to upper surface of parcel shelf using

screws, washers and nuts supplied in package.

NOTE: Blind assembly must be fitted so retractable

blind are easily withdrawn towards front of vehicle.

Be sure slots in tube favour a frontal position, refer

Figure 1.

7. Remove the 2 headliner retainers from the vehicle

above the rear seat back cushion and discard. Refer

Figure 2.

8. Fit nutsert into slot, ensuring orientation aligns with

the shape of the slot, Refer Figure 3.

9. Attach one hook to each rear window side trim using

self tapping screw.

10. Refit parcel shelf and check operation of blind.

11. Refit parcel straps to retaining hooks

12. Place fitting instructions in the glove box of the

vehicle.

NUT

(2 PLACES

EACH SIDE)

WASHER

(2 PLACES

EACH SIDE)

SCREW

(2 PLACES

EACH SIDE)

REAR WINDOW BLIND

REAR PARCEL SHELF

DRILL

4.0 DIA.

HOLE

(2 PLACES

EACH SIDE)

FIGURE 1

FIGURE 2

FIGURE 3

SELF

TAPPING

SCREW

NUTSERT

(2 PLACES)

PLASTIC HOOK

DESCRIPTION QUANTITY

BLIND, REAR WINDOW 1

SCREW 4

WASHER 4

NUT 4

HOOK, REAR BLIND 2

SCREW, SELF TAPPING 2

NUTSERT 2

FITTING INSTRUCTIONS - FD1008 1

PARTS LIST

PLACE BLIND ON PARCEL SHELF TO

ACHIEVE EQUAL MARGIN EACH SIDE

FITTING INSTRUCTIONS 35.0mm

REMOVE

HEADLINING

TRIM FASTENERS

(2 PLACES)

TOOLS REQUIRED

Power Drill,Screw Driver-Philips Head, 4.0 mm Drill Bit &

Metric Ruler.