FITTING INSTRUCTIONS FOR
XC BARINA FRONT SEAT INSERTS
(5 DOOR)
Part No. 92144470
FD1016
05AP01
COPYRIGHT
Page 1 of 2
FD1016-01
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
FITTING INSTRUCTIONS
1. Remove head restraint assembly.
2. Insert head restraint mounting assembly through 2 holes in front seat insert upper and reinstall the
head restraint. Refer View A, Page 2.
3. Firmly and squarely, pull the seat back insert down into position over the top of the seat back. Refer
View A, Page 2.
4. Feed the fastening buckles through between the seat back and the seat cushion. Fit and align the
seat cushion section of the insert into position and pull through to achieve a tuck of 20 to 30mm in
between the seat cushion and the seat back. Refer Section A-A, Page 2.
5. Feed the front fastening buckles under the seat, above and over all adjustments and wiring
assemblies. Refer View B, Page 2.
6. Fasten the buckles and tension by pulling loose end of fastening strap. Tuck excess tape out of
sight.
7. Some periodic adjustment and re-tensioning may be required to maintain the best fit.
8. Repeat fitting process to the opposite side. Place fitting instructions in the vehicles glove box.
WASHING INSTRUCTIONS
Dry cleaning recommended.
Hand wash with approved wool detergents. Do not soak for prolonged periods.
Rinse and gentle spin (fleece out) dry away from direct heat, preferably flat in shaded area.
While still damp, gently pull into shape and brush with a coarse stiff brush to restore pile.
FITTING INSTRUCTIONS FOR
XC BARINA FRONT SEAT INSERTS
COPYRIGHT
FD1016-02
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd ACN 006 893 232
Page 2 of 2
A
VIEW B
B
FRONT
ROUTE FASTENING CLIPS
UNDER THE SEAT, ABOVE
ALL MECHANISMS AND
WIRING ASSEMBLIES
A-A
SECTION
BACKREST
SEAT
CUSHION
SEAT
INSERT
BACK
INSERT
PULL THROUGH AND
TUCK 20-30mm OF
SEAT INSERT IN
BETWEEN SEAT
CUSHION AND
SEAT BACK
A
A
20-30mm
VIEW A
HEAD RESTRAINT
DESCRIPTION QTY
COVER INSERT 2
FITTING INSTRUCTIONS - FD1016 1
PARTS LIST
PULL INSERT DOWN
FD1016
05AP01