FITTING INSTRUCTIONS FOR
ZC VECTRA SEDAN AND HATCH
ROOFBARS
Part No. 09162789
FD1142
09DE02
COPYRIGHT
Page 1 of 4
G760
HOLDEN SERVICE PARTS OPERATIONS
Reproduction in whole or part
prohibited without written approval
Division of HOLDEN Ltd Can 006 893 232
FIGURE 3
LOCKING LEVER
Page 2 of 4
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd Can 006 893 232
FITTING INSTRUCTIONS:
NOTE: It is recommended to gain assistance to fit the
roofbars to ensure no damage occurs to the roof during
installation.
1. Locate the four flip-up covers in the roof gutter and open
to expose the roofbar mountings.
Refer Figure 1, View A.
2. Raise the leaver on the roofbar supports. This allows the
supports to be aligned to the mountings. Refer Figure 2.
3. Slide the locking lever across ready to place the bars on
the vehicle. Refer Figure 3.
NOTE: Repeat steps 3 and 4 for all four supports.
FIGURE 1
FITTING INSTRUCTIONS FOR
ZC VECTRA ROOFBAR PACKAGE
FIGURE 2
A
FLIP-UP
COVER
ROOFBAR
MOUNTING
RAISE LEVER
TO UNLOCK
SUPPORT
SUPPORT CAN BE ROTATED
AND MOVED ALONG BAR TO
LOCATE ACCURATELY
A
G760
FD1142
09DE02
FIGURE 5
LOCKING
LEVER
Page 3 of 4
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd Can 006 893 232
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
FITTING INSTRUCTIONS: - continued.
4. Each support has a label indicating the correct mounting location as follows:
FL - Front Left
FR - Front Right
RL - Rear Left
RR - Rear Right
5. With assistance install the supports of the rear bar into the correct mountings pushing down firmly to locate correctly.
Refer Figure 4.
NOTE: This should be done for both sides at the same time.
FIGURE 4
A
A
FITTING INSTRUCTIONS FOR
ZC VECTRA ROOFBAR PACKAGE
FITTING INSTRUCTIONS: - continued.
6. Engage the locking lever, ensuring that the support is
securely located. Refer Figure 5.
G760
RR
RL
FD1142
09DE02
FIGURE 7
Page 4 of 4
COPYRIGHT
Reproduction in whole or part
prohibited without written approval
HOLDEN SERVICE PARTS OPERATIONS
Division of HOLDEN Ltd Can 006 893 232
FITTING INSTRUCTIONS: - continued.
7. Lower the lever back into position.
Refer Figure 6, View A.
8. Ins tall the cover and lock in place with the key provided.
Refer Figure 6, View B.
9. Repeat Steps 6 to 8 for the support on the other side.
10. Repeat Steps 4 to 9 with the front bar.
11. Before placing a load on the roof bars ensure that the
supports are securely fitted.
12. Place a copy of these instructions and the keys to the
covers in the glove box.
IMPORTANT: The maximum load for these bars is
100kgs. Ensure that the load is evenly distributed.
Refer Figure 7.
FIGURE 6
LOWER LEVER
TO LOCK
SUPPORT
COVER
COVER
LOCKING
KEY
FITTING INSTRUCTIONS FOR
ZC VECTRA ROOFBAR PACKAGE
ZC VECTRA ROOFBAR PACKAGE
PARTS LIST
PART NUMBER DESCRIPTION QUANTITY
09162789 ROOFBAR PACKAGE 1
FRONT ROOFBAR 1
REAR ROOFBAR 1
SUPPORT COVERS 4
COVER LOCKING KEYS 4
FD1142 FITTING INSTRUCTIONS 1
AB
G760
FD1142
09DE02