holden.wiki

• MODEL SELECTION INDEX
• BODY STRUCTURE REPAIR MANUAL - MENU
• SECTION 10D – BODY REAR – COUPE
  • 1. GENERAL DESCRIPTION
    • 1.1 BODY REAR COMPONENTS
  • 2. SERVICE OPERATIONS
    • 2.1 REAR END LOWER PANEL – REPLACE
      • REMOVE
      • REPLACE
    • 2.2 REAR END PANEL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.3 FUEL TANK SUPPORT REINFORCEMENT ASSEMBLY– REPLACE
      • REMOVE
      • REPLACE
    • 2.4 REAR COMPARTMENT FLOOR PANEL OUTER EXTENSION – REPLACE
      • REMOVE
      • REPLACE
    • 2.5 REAR COMPARTMENT FLOOR PANEL ASSEMBLY– REPLACE
      • REMOVE
      • REPLACE
    • 2.6 REAR WINDOW PANEL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.7 REAR SEAT BACK PANEL EXTENSION ASSEMBLY or REAR WHEELHOUSE INNER PANEL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.8 REAR COMPARTMENT LID STRUT BRACKET ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.9 CROSSMEMBER ASSEMBLY NO. 2 – REPLACE
      • REMOVE
      • REPLACE
    • 2.10 REAR FLOOR PANEL OUTER EXTENSION – REPLACE
      • REMOVE
      • REPLACE
    • 2.11 REAR TIE DOWN ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.12 REAR BUMPER IMPACT BAR BRACE ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.13 REAR SIDE RAIL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.14 REAR FLOOR PANEL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.15 REAR FLOOR PANEL REINFORCEMENT – REPLACE
      • LEFT-HAND SIDE
      • RIGHT-HAND SIDE