holden
.wiki
Home
Main Menu
Home
Main Menu
MODEL SELECTION INDEX
UBS JACKAROO
SECTION 11B - ENGINE IMMOBILISER SYSTEM - 4JX1 DIESEL ENGINE
General Information
System Components
Engine Start Sequence
System Programming
TECH 2 Operation
Transponder-Key Programming
Erasing Transponder Keys
Programming The Immobiliser Control Unit (ICU)
Programming The Engine Controller
Programming The ICU And The ECM
Enable Programming TIS 2000
Diagnostic Trouble Codes
Multiple DTCs
Engine Will Not Crank - No DTC Set
DTC B8011 - Transponder Key Problem
DTC B8012 - Wrong Transponder Key
DTC B8013 - Immobiliser Not Programmed
DTC B8014 - No Transponder Key Programmed
DTC B8015 - Vehicle Speed Sensor Signal Low (<2.5v)
DTC B8016 - Vehicle Speed Sensor Signal High (>2.5v)
DTC B8017 - No ECM Request Received
DTC B8023 - Antenna Coil Open Circuit
DTC B8024 - Wrong Transponder Response
DTC B8025 - Wrong Engine Request Signal
DTC B8026 - Relay Output Low
DTC B8027 - Relay Output High
DTC B8055 - EEPROM Error
Immobiliser Control Unit Harness Connector
Wiring Diagram
