HVAC Occupant Climate Control (Auto A/C) – Removal and Installation Page 2E–1
Page 2E–1
Section 2E
HVAC Occupant Climate Control (Auto A/C)
– Removal and Installation
ATTENTION
Before performing any Service Operation or other procedure described in this Section, refer to Section 00
Warnings, Cautions and Notes for correct workshop practices with regard to safety and/or property damage.
1 General Information ...............................................................................................................................2
1.1 Vehicle Builds from Tag No. L174938 Onwards.................................................................................................. 2
1.2 Vehicle Builds Prior to Tag No. L174938 ............................................................................................................. 3
Techline
Techline
Techline
HVAC Occupant Climate Control (Auto A/C) – Removal and Installation Page 2E–2
Page 2E–2
1 General Information
The HVAC Occupant Climate Control (Auto A/C) system as fitted to MY 2004 Crew Cab vehicles is carried over from the
previously released MY 2003 VY and V2 Series vehicles.
For removal and installation information for ventilation outlets refer to Section 2B, 2.1 Body Ventilation Outlets.
If removal of the HVAC unit is required, refer to Section 2B, 3 Heating, Ventilation and Air Conditioning (HVAC) Unit in
the MY 2003 VY and V2 Series Service Inform ation noting that information which is specific to LHD vehicles is not
applicable.
1.1 Vehicle Builds from Tag No. L174938
Onwards
From Tag No. L174938 a revised HVAC unit has been fitted. For information regarding the removal and installation of
heating, ventilation and air conditioning system component s which are common to both
Manual A/C and OCC (Auto A/C) type systems (e.g. ducting, piping, hoses, condenser, filter drier receiver,
compressor, evaporator, heater core, blower fan, engine cooling fans and water valve), refer to
Section 2B HVAC Climate Control (Manual A/C) – Removal and Installation in the MY 2004 VY and V2 Series Service
Information, noting that information which is specific to LHD vehicles is not applicable.
For information regarding the removal and installation of heating, ventilation and air conditioning
system components which are particular to OCC (Auto A/C) type systems, refer to
Section 2E HVAC Occupant Climate Control (Auto A/C) – Removal and Installation in the MY 2004 VY and V2 Series
Service Information, noting that information which is specific to LHD vehicles is not applicable.
HVAC Occupant Climate Control (Auto A/C) – Removal and Installation Page 2E–3
Page 2E–3
1.2 Vehicle Builds Prior to Tag No. L174938
For information regarding the removal and installation of heating, ventilation and air conditioning
system components which are common to both Manual A/C and OCC (Auto A/C) type systems (e.g. ducting, piping,
hoses, condenser, filter drier receiver, compressor, evap orator, heater core, blower fan, engine cooling fans and
water valve) and which are fitted to vehicles built prior to Tag No. L174938, refer to
Section 2B HVAC Climate Control (Manual A/C) – Removal and Installation in the MY 2003 VY and V2 Series Service
Information, noting that information which is specific to LHD vehicles is not applicable.
For information regarding the removal and installation of heating, ventilation and air conditioning system components
which are particular to OCC (Auto A/C) type systems and which are fitted to vehicles built prior to Tag No. L174938,
refer to Section 2E HVAC Occupant Climate Control (Auto A/C) – Removal and Installation in the MY 2003 VY and V2
Series Service Information, noting that information which is specific to LHD vehicles is not applicable.