holden.wiki

• MODEL SELECTION INDEX
• MY2005 WL Series - Service Information
• Section 2B HVAC Climate Control (Manual A/C) – Servicing and Diagnosis
  • 1 Refrigerant Handling Precautions
  • 2 Service Operations
    • 2.1 Manifold Gauge Installation
    • 2.2 System Charging and Evacuation
      • Filling a Dial-A-Charge Cylinder
      • Evacuation and Leak Test
      • Charging System
    • 2.3 Checking System Oil Charge
    • 2.4 Flushing the A/C System for Contamination or Lubricating Oil
      • Flushing Procedure
    • 2.5 Lubricating Oil Compensation
      • Installing the Original Compressor
      • Installing a New Compressor
      • Evaporator or Condenser
      • Filter Drier Receiver (FDR)
      • Blown or Ruptured Pipe/Hose
  • 3 System Functional Check
  • 4 Diagnostics
    • 4.1 Air-conditioner System Diagnosis
      • Introduction
        • Preliminary Inspection
        • Air-conditioning System Tests
      • Preliminary Inspection
      • Test 1: Checking Refrigerant Charge
      • Test 2: Checking Compressor Clutch Engagement
        • Compressor Electrical Connector
      • Test 3: Checking Compressor System Performance
        • Vehicle Set-up
        • Air-conditioning System Performance Chart
      • Test 4: Checking Compressor for Less Than Full Stroke (Low
        • Vehicle Set Up
        • Test Procedure
      • Test 5: Checking Compressor for Full Stroke Operation (High
        • Vehicle Set Up
      • Test 6: TXV Operational Check on Vehicle
        • Vehicle Set Up
      • Test 7: Noise Diagnosis
        • Preliminary Check
        • Compressor Noise Check
  • 5 Specifications
  • 6 Special Tools