holden.wiki

• MODEL SELECTION INDEX
• MY2005 WL Series - Service Information
• Section 2C HVAC Climate Control (Manual A/C) – Removal and Installation
  • 1 General Information
  • 2 Heating, Ventilation and Air-conditioning (HVAC) Unit
    • 2.1 HVAC Unit
      • Remove
      • Reinstall
    • 2.2 Evaporator
      • Remove
      • Reinstall
    • 2.3 Heater Core
      • Remove
      • Reinstall
    • 2.4 Blower Motor and Fan Assembly
      • Remove
      • Reinstall
    • 2.5 Electronic Blower Motor Controller
      • Remove
      • Test
        • Test 1
        • Test 2
      • Reinstall
    • 2.6 Intake Blower Duct
      • Remove
      • Reinstall
    • 2.7 Vent Distribution Housing
      • Remove
      • Reinstall
  • 3 Vacuum System
    • 3.1 Vacuum Retention Tests
      • Check Valve
      • Vacuum Tank
      • Vacuum Solenoid Pack
      • Vacuum Actuators
      • Water Valve Actuator
      • Vacuum Lines
        • Vacuum Actuator Lines
        • Vacuum Manifold Line
    • 3.2 Vacuum Tank
      • Remove
      • Reinstall
    • 3.3 Vacuum Actuators
      • Intake Actuator (fresh / recirculation)
        • Remove
        • Reinstall
      • Face Actuator
        • Remove
        • Reinstall
      • Foot Actuator
        • Remove
        • Reinstall
  • 4 Air-conditioning Lines and Retainers
    • 4.1 Replace
      • Lines and Retainers Views – V6
      • Lines and Retainers Views – GEN III V8
  • 5 Air-conditioning Components
    • 5.1 Thermal Expansion Valve
      • Remove
      • Reinstall
    • 5.2 A/C Pressure Transducer
      • Replace – V6
      • Replace – GEN III V8
    • 5.3 Condenser Assembly
      • V6 Engine
        • Remove
        • Reinstall
      • GEN III V8 Engine
        • Remove
        • Reinstall
    • 5.4 Filter Drier Receiver
      • Remove
      • Reinstall
    • 5.5 Air-conditioning Compressor Assembly
      • V6 Engine
        • Remove
        • Reinstall
      • GEN III V8 Engine
        • Remove
        • Reinstall
  • 6 Drive Belts and Pulleys
  • 7 Minor Compressor Repairs – GEN III V8
    • 7.1 Compressor Control Valve
      • Remove
      • Reinstall
    • 7.2 Clutch Drive Plate and Hub Assembly
      • Remove
      • Reinstall
    • 7.3 Clutch Pulley and Bearing Assembly
      • Remove
      • Reinstall
  • 8 Under-hood Heater Components
    • 8.1 Water Valve Assembly
      • V6 Engine
        • Remove
        • Test
        • Reinstall
      • GEN III V8 Engine
        • Remove
        • Test
        • Reinstall
    • 8.2 Heater Hoses and Vacuum Lines
      • Replace – V6
      • Replace – GEN III V8
  • 9 HVAC Inlet, Ducts and Ventilation Outlets
    • 9.1 HVAC Inlet Screen Assembly
      • Remove
      • Reinstall
    • 9.2 HVAC System Ducts
      • HVAC Ducts View
      • Driver Side Outer and Inner Ducts
        • Remove
        • Reinstall
      • Passenger Side Duct
        • Remove
        • Reinstall
      • Floor Console Rear Duct
      • Floor Console Front Duct
        • Remove
        • Reinstall
      • Foot Duct Outlet
        • Remove
        • Reinstall
    • 9.3 Cabin Ventilation Outlets
    • 9.4 Body Ventilation Outlets
      • Remove
      • Reinstall
  • 10 Torque Wrench Specifications
  • 11 Special Tools