Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • MY2005 WL Series - Service Inforamtion
  • Section 7C4 Automatic Transmission – 4L60E – On-vehicle Ser
    • 1 General Information
      • 1.1 General Service Information
        • Description
        • Service Information
    • 2 Maintenance Operations
      • 2.1 Transmission Fluid
        • Transmission Fluid Level
        • Transmission Fluid Colour
      • 2.2 Reverse Flush and Flow Rate Test
        • Reverse Flush
        • Flow Rate Test
    • 3 Service Operations
      • 3.1 Fluid Change and Filter Replacement
        • Remove
        • Reinstall
      • 3.2 Selector Linkage and Rod
        • Remove
        • Inspect
        • Reinstall
      • 3.3 Shift Selector Assembly
        • Remove
        • Disassemble
          • Lower Housing Assembly
          • Patch Harness and Switch
          • Upper Cover, Boot and Selector Knob
          • Selector Lever Assembly
        • Reinstall
      • 3.4 Neutral Start and Back-up Lamp Switch
        • Remove
        • Reinstall
        • Adjust
      • 3.5 Vehicle Speed Sensor
        • Remove
        • Reinstall
      • 3.6 Manual Shaft Oil Seal
        • Replace
      • 3.7 Transmission Support and Mount
        • Remove
        • Reinstall
      • 3.8 Extension Housing and Rear Bush
        • Remove
        • Reinstall
      • 3.9 Extension Housing Oil Seal
        • Replace
      • 3.10 Shift Solenoid Locations
        • Location and Identification
      • 3.11 1 – 2 Accumulator Assembly
        • Remove
        • Clean and Inspect
        • Reinstall
      • 3.12 Control Valve Body Harness
        • Remove
        • Reinstall
      • 3.13 Control Valve Body
        • Remove
        • Disassemble, Clean, Inspect and Reassemble
        • Reinstall
      • 3.14 Spacer Plate, Check Balls, Filter Screens and 3 – 4 Accumulator
        • Remove
        • Clean and Inspect
        • Reinstall
      • 3.15 Filler Tube and Breather Hose
        • Remove
        • Reinstall
      • 3.16 Transmission Cooler Lines and Hoses
        • Arrangement
          • Radiator
          • Fluid Cooler Lines
        • Radiator Cooler Hoses / Lines
          • Remove
          • Reinstall
        • Transmission Fluid Lines
          • Remove
          • Reinstall
      • 3.17 Transmission Assembly
        • Remove
        • Reinstall
      • 3.18 Transmission Control Module
        • Remove
        • Reinstall
        • TCM Programming Procedure
    • 4 Specifications
    • 5 Torque Wrench Specifications
    • 6 Special Tools
Made by Mibble ♥