Sheetmetal and Subfram e Page 1B–1
Page 1B–1
Section 1B
Sheetmetal and Subfram e
ATTENTION
Before performing any Service Operation or other procedure described in this Section, refer to Section 00
Warnings, Cautions and Notes for correct workshop practices with regard to safety and/or property damage.
1 General Information............................................................................................................................... 2
2 Service Operations................................................................................................................................3
2.1 Body Structure Replacement Parts ......................................................................................................................3
Underbody ..............................................................................................................................................................4
Sheetmetal and Subfram e Page 1B–2
Page 1B–2
1 General Information
With the following exceptions, MY 2004 VY AWD Crew Cab Sheetmetal and Rear Subframe information carries over
from MY 2004 VY Crew Cab vehicles.
• Underbody structure replacement parts
For information not contained within this Section, refer to Section 1B Sheetmetal in the MY 2004 VY Regular Cab and
Crew Cab Service Information.
Sheetmetal and Subfram e Page 1B–3
Page 1B–3
2 Service Operations
2.1 Body Structure Replacement Parts
The following illustration and table describes the AWD Crew Cab underbody structure assemblies that are available for
se rvice replacement.
NOTE
Although not shown, VY AW D Crew Cab vehicles
are fitted with unique rear quarter panels and
share its front fenders with VY AWD Wagon
vehicles, as these components have holes to
accommodate the wheelhouse flares.
The purpose of this information is to provide the repairer with a better understanding of available replacement sections.
For further information regarding the body structure, refer to the VY Regular Cab and Crew Cab Service Information
Supplement, Body Structure Repair.
Sheetmetal and Subfram e Page 1B–4
Page 1B–4
Underbody
Figure 1B – 1
Sheetmetal and Subfram e Page 1B–5
Page 1B–5
Legend
1 Inner Rocker P anel Assembl y
2 Seat Inner Bracket Assembly
3 Seat Outer Bracket Ass embly, RH/ LH
4 Front Floor Panel Assembly
5 Transmission Support Bracket, RH
6 Transmission Support Bracket, LH
7 Front Floor Panel Extension
8 Front Side Rail Brace, RH/ LH
9 ABS Modulator Bracket Assembly
10 Front Wheelhouse Panel Assembly
11 Horn Bracket Assembly
12 Battery Tray Assembly
13 Front End Panel Assembly
14 Headlamp Panel, LH/ RH
15 Radiator Lower Support Ass em bly
16 Headlamp & Front Fascia Mount Bracket, LH/ RH
17 Fender Front Lower Bracket, LH/ RH
18 Front Side Rail Assembly, LH/ RH
19 Radiator Side Mounting B rack et, LH/ RH
20 Front Wheelhouse Bracket Assembly, LH/ RH
21 Front Bumper Impact Bar Bracket, LH/ RH
22 Front Wheelhouse Panel Bracket, LH/ RH
23 Rear Lower Body Panel Assem bly, LH/ RH
24 Rear Lower Body Panel
25 Front Floor Panel Extension Assembly
26 Floor Panel Plate Assembly, two each LH/ RH
27 Rear Seatbelt Anchor Plat e Ass em bly, three places
28 Propeller Shaft Hanger Assembly