SECTION 2E - ECC –

REMOVAL & INSTALLATION

IMPORTANT

Before performing any Service Operation or other procedure described in this Section, refer to Section

00 CAUTIONS AND NOTES for correct workshop practices with regard to safety and/or property damage.

1. GENERAL INFORMATION

Techline

1. GENERAL I NFORMATI O N

The rem oval and installation proc edures for the ECC system s as fitted to V2 Series Models car ries over from the

information provided for VT Series Models, noting the following:

• A new condenser, radiator and fan module (CFRM) was introduced with the MY2003 V2 Series Update

Models during October 2002.

NOTE: For all information regarding the revised CRFM, refer to Section 2B – HEATING & AIR CONDITIONING –

REMOVAL AND INSTALLATION in this Service Information.

For information relating to the removal and installation of the ECC system as fitted to V2 Series Models, refer to

Section 2E - ELECTRONIC CLIMATE CONTROL (ECC) – REMOVAL & INSTALLATION in the VT Series I

Service Information.