SECTION 9A - STEERING
IMPORTANT
Before performing any Service Operation or other procedure described in this Section, refer to Section
00 CAUTIONS AND NOTES for correct workshop practices with regard to safety and/or property damage.
1. GENERAL I NFORMATI O N
The steering system fitted to V2 Series Models carries over from VT Series II Models, noting the following:
• The steering gear fitted to V2 Series Models has a revised ratio and rotary valve assembly for improved steering
precision, directional stability and cornering.
• Speed sensitive power steering (Production Option NV7) is not available for V2 Series Models.
For further information relating to the steering system as fitted to V2 Series Models, refer to
Section 9A STEERING in the VT Series II Servic e Inf or mation in conjunction with Section 9A STEERING in the VT
Series I Service Information.
Techline
Techline
2. SPECIFICATIONS
STEERING GEAR
Steering Gear Type
Power Steering........................................................... Rack and pinion with integral power cylinder and
rotary valve mechanism - variable ratio
Steering Gear Ratio
On-centre.................................................................... 19.8:1
Toward Lock............................................................... 13.6:1
No. of Steering Wheel turns Lock to Lock....................... 3.0
Nominal Rack Travel Total.............................................. 164 mm