Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • VX SERIES - COMMODORE, CALAIS SERVICE INFORMATION
  • SECTION 6C3-3 - SERVICE OPERATIONS - GEN III V8 ENGINE
    • IMPORTANT
    • 3.1 SERVICE PRECAUTIONSTHE FOLLOWING REQUIREMENTS MUST BE OBSERVED WHEN WORKING ON VEHICLES:
    • 3.2 POWERTRAIN CONTROL MODULE (PCM)
      • PCM REPLACEMENT/ PROGRAMMING
      • REMOVE
      • REINSTALL
      • SERVICE PROGRAMMING
      • PCM/PIM/BCM SECURITY LINK
      • IDLE LEARN PROCEDURE
      • FUNCTIONAL CHECK
    • 3.3 POWERTRAIN INTERFACE MODULE (PIM)
      • PIM REPLACEMENT
      • REMOVE
      • REINSTALL
      • PCM/PIM/BCM SECURITY LINK
      • FUNCTIONAL CHECK
    • 3.4 ENGINE COOLANT TEMPERATURE (ECT) SENSOR
      • REMOVE
      • REINSTALL
    • 3.5 ENGINE COOLANT LEVEL SWITCH
    • 3.6 INTAKE AIR TEMPERATURE (IAT) SENSOR
      • REMOVE
      • REINSTALL
    • 3.7 MASS AIR FLOW (MAF) SENSOR
      • REMOVE
      • REINSTALL
    • 3.8 MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
      • REMOVE
      • REINSTALL
    • 3.9 HEATED OXYGEN SENSORS (HO2S)
      • REMOVE
      • REINSTALL
    • 3.10 THROTTLE POSITION (TP) SENSOR
      • REMOVE
      • REINSTALL
    • 3.11 VEHICLE SPEED SENSOR
      • REMOVE
      • REINSTALL
    • 3.12 IDLE AIR CONTROL VALVE
      • REMOVE
      • REINSTALL
    • 3.13 CAMSHAFT POSITION (CMP) SENSOR
      • REMOVE
      • REINSTALL
    • 3.14 THROTTLE CONTROL
      • ACCELERATOR PEDAL CABLE - VEHICLES WITH ETC
      • THROTTLE CABLE - VEHICLES WITH ETC
      • THROTTLE CABLE - VEHICLES WITHOUT ETC
      • THROTTLE RELAXER - VEHICLES WITH ETC
      • THROTTLE CABLE ADJUSTMENT - ALL
    • 3.15 FUEL CONTROL SYSTEM
      • THROTTLE BODY
      • FUEL PUMP RELAY
      • FUEL PRESSURE RELIEF PROCEDURE
      • FUEL GAUGE INSTALLATION PROCEDURE
      • QUICK CONNECT FITTINGS (METAL COLLAR)
      • QUICK CONNECT FITTINGS (PLASTIC COLLAR)
      • FUEL FILTER
      • LEAK TESTING
      • MODULAR FUEL SENDER ASSEMBLY
      • FUEL PULSE DAMPENER
      • FUEL HOSE/ PIPES (ENGINE COMPARTMENT)
      • FUEL HOSE/PIPE ASSEMBLY (REAR PIPES)
      • FUEL SYSTEM CLEANING
      • FUEL PRESSURE CONNECTION (SCHRADER VALVE)
      • FUEL RAIL ASSEMBLY
      • FUEL INJECTOR
      • FUEL SYSTEM PRESSURE TEST
    • 3.16 IGNITION COIL/MODULE
      • REMOVE
      • REINSTALL
    • 3.17 CRANKSHAFT POSITION (CKP) SENSOR
      • REMOVE
      • REINSTALL
    • 3.18 KNOCK SENSORS
      • REMOVE
      • REINSTALL
    • 3.19 EVAPORATIVE EMISSION CONTROL SYSTEM (EECS) CANISTER
    • 3.20 EVAPORATIVE EMISSION CONTROL SYSTEM (EECS) CANISTER PURGE SOLENOID VALVE
      • REMOVE
      • REINSTALL
      • EVAPORATIVE SYSTEM CLEANING
    • 3.21 A/C REFRIGERANT PRESSURE SENSOR
      • REMOVE
      • REINSTALL
    • 3.22 OIL PRESSURE SENSOR
      • REMOVE
      • REINSTALL
    • 3.23 AIR CLEANER ASSEMBLY
      • REMOVE
      • REINSTALL
    • 3.24 REVERSE INHIBIT SOLENOID (MANUAL TRANSMISSION)
    • 3.25 AUTOMATIC TRANSMISSION
Made by Mibble ♥