SECTION 12A - BATTERY & CABLES

IMPORTANT

Before performing any Service Operation or other procedure described in this Section, refer to Section

00 CAUTIONS AND NOTES for correct workshop practices with regard to safety and/or property damage.

1. GENERAL I NFORMATI O N

Excluding revised battery specifications, all information relating to the battery and battery cables for VX Series

Models c arries over fr om the infor mation publis hed for VT Series Models, noting the f ollowing, refer to Section 12A

BATTERY & CABLES of the VT Series I Service Information and of the VT Series II Service Information.

NOTE: Information in these two Volume is to be read in conjunction with each other.

Techline

2. SPECIFICATIONS

ALL MODELS

Rated Voltage.................................................... 12 volts

Charge Acceptance ........................................... 10 amps minimum

Cold Cranking Current (RCC)............................ 430 amps minimum

Reserve Capacity (RRC)................................... 85 minutes minimum

20 Hour Discharge............................................. 54 amp-hour minimum

5 Second Voltage @ 25°C................................. 150 amps 10.6 volts ±0.2 volt

......................................................................... 400 amps 9.0 volts ±0.2 volt

Number of Plates (per cell)................................ 11

NOTE: Specified ratings when tested in accordance with Australian Standard AS 2149-1990