SECTION 6C1-6 - SPECIAL TOOLS -

V6 SUPERCHARGED ENGINE

TOOL NO. REF.

IN TEXT TOOL DESCRIPTION COMMENTS

SD28018

OR AU338 FUEL PRESSURE GAUGE - HIGH PRESSURE

USED FOR CHECKING SYSTEM

FUEL PRESSURE IN

CONJUNCTION WITH AU453.

SD28018

PREVIOUSLY RELEASED

FOR V CAR - MANDATORY TOOL

CLASSIFICATION

ST-8329 INJECTOR TEST LIGHT

PREVIOUSLY RELEASED.

USED TO CHECK FOR POWER

AND THE CONTROL CIRCUIT OF

THE FUEL INJECTOR FOR

PROPER OPERATION.

SD28057 FUEL PRESSURE GAUGE HOSE

NON-SUPERCHARGE

PREVIOUSLY RELEASED.

MUST BE USED IN

CONJUNCTION WITH TOOL NO.

216812, TUBE AND 7434,

COUPLER FOR CHECKING FUEL

PRESSURE ON VS SERIES

MODELS. USED FOR NON-

SUPERCHARGER APPLICATION.

AU453 FUEL GAUGE SCHRADER FITTING ADAPTER

SUPERCHARGE

USED FOR CHECKING SYSTEM

FUEL PRESSURE IN

CONJUNCTION WITH SD28018.

PREVIOUSLY RELEASED

FOR TR ASTRA - MANDATORY

CLASSIFICATION.

TOOL NO. REF.

IN TEXT TOOL DESCRIPTION COMMENTS

7434 COUPLER

PREVIOUSLY RELEASED

J 33095 MICRO-PACK TERMINAL REMOVER

PREVIOUSLY RELEASED

J 28742 OR J 36400-5 WEATHER PACK TERMINAL REMOVER

PREVIOUSLY RELEASED

BT-8515 EXHAUST BACK PRESSURE GAUGE (WITH

ADAPTER)

PREVIOUSLY RELEASED

TOOL NO. REF.

IN TEXT TOOL DESCRIPTION COMMENTS

7000086I TECH 2 SCAN TOOL

A HAND-HELD SCAN TOOL

USED TO ANALYZE AND

DIAGNOSE FUEL AND EMISSION

SYSTEM. ALSO CAN BE USED

TO ANALYZE OTHER

COMPUTER SYSTEMS. THIS

TECH 2 SCAN TOOL IS SIMILAR

TO THE PREVIOUSLY

RELEASED TECH 1, BUT WITH

MORE FUNCTIONS AND

CAPABILITY

J 39765 FUEL SENDER LOCKNUT WRENCH

THIS TOOL IS USED FOR

REMOVAL OF THE MODULAR

FUEL SENDER ASSEMBLY

RETAINING RING

J 25359-19 NO. 15 TORX BIT

COMMERCIALLY AVAILABLE.

USED TO REMOVE PROM

ACCESS COVER FROM PCM

7370 QUICK CONNECT RELEASE TOOL

FOR NON-SUPERCHARGER APPLICATION

USED FOR RELEASING THE

FUEL INLET AND RETURN HOSE

QUICK CONNECTS AT THE

DASH PANEL CONNECTIONS

ONCE THE FUEL SYSTEM HAS

BEEN DEPRESSURISED.

PREVIOUSLY RELEASED

FOR V CAR - MANDATORY

CLASSIFICATION

TOOL NO. REF.

IN TEXT TOOL DESCRIPTION COMMENTS

7371 QUICK CONNECT RELEASE TOOL

FOR SUPERCHARGER APPLICATION

USED FOR RELEASING THE

FUEL INLET AND RETURN HOSE

QUICK CONNECTS AT THE

DASH PANEL CONNECTIONS

ONCE THE FUEL SYSTEM HAS

BEEN DEPRESSURISED.

NEW TOOL - DESIRABLE TOOL

CLASSIFICATION.

J 39200 DIGITAL MULTIMETER

COMMERCIALLY AVAILABLE,

WITH 10 MEG OHM INPUT

IMPEDANCE.

PREVIOUSLY RELEASED.

MULTIMETER AND TEST LIGHT

MUST BE USED AS SPECIFIED

IN DIAGNOSIS PROCEDURES.

THEY MUST NOT BE

INTERCHANGED.

J 23738 VACUUM PUMP (20 IN. HG MINIMUM)

COMMERCIALLY AVAILABLE

PREVIOUSLY RELEASED

J 34142-A UNPOWERED TEST LIGHT

COMMERCIALLY AVAILABLE.

PREVIOUSLY RELEASED.

MUST HAVE CURRENT DRAW

OF LESS THAN 0.3 A

TOOL NO. REF.

IN TEXT TOOL DESCRIPTION COMMENTS

ST-125 OR 7230 HEI TESTER

PREVIOUSLY RELEASED

J 35616 CONNECTOR TEST ADAPTER KIT

PREVIOUSLY RELEASED

J 39775 JUMPER HARNESS

PREVIOUSLY RELEASED

24505373 BYPASS ACTUATOR ADJUSTING TOOL

USED ON THE SUPERCHARGE

ENGINE APPLICATION FOR

REMOVAL OF THE BYPASS

ACTUATOR OR ADJUSTMENT.

NEW TOOL - DESIRABLE TOOL

CLASSIFICATION.

J 39021

FUEL INJECTOR

COIL/BALANCE TESTER

GEN3 0151

THIS TESTER IS USED IN

CONJUNCTION WITH A DIGITAL

MULTIMETER FOR TESTING

FUEL INJECTOR COILS, AND

CYLINDER INJECTOR BALANCE

TESTING.

MANDATORY CLASSIFICATION.