SECTION 6C1-6 - SPECIAL TOOLS –

V6 ENGINE

TOOL

NUMBER ILLUSTRATION DESCRIPTION CLASSIFICATION

3588

DIGITAL MULTIMETER

Used for various measurement functions

as detailed in the text.

Previously released as J 39200, 3545

GM and also commercially available with

a minimum of 10 Megohm impedance.

Available

7230

HEI TESTER

Also previously released as ST-125 .

Mandatory

7370

QUICK CONNECT RELEASE TOOL

FOR V6 ENGINE – 5/16”

Used for releasing the fuel inlet and

return hose quick connects at the dash

panel connections, after depressurising

the fuel system.

Previously released.

Mandatory

212157

COUPLER

Used in conjunction with hose AU470

and gauge AU338 for checking the fuel

pressure on v6 engined vehicles.

Mandatory

7000086I

TECH 2 SCAN TOOL

Used for diagnosis of vehicle electrical

systems.

Previously released.

Mandatory

AU338

FUEL PRESSURE GAUGE - HIGH

PRESSURE

Used for checking system fuel pressure

in conjunction with AU453.

Also previously released asSD28018.

Mandatory

AU469

FUEL SENDER LOCKNUT WRENCH

This tool is used for removal of the

modular fuel sender assembly retaining

ring.

Also previously released as J 39765.

Mandatory

AU470 FUEL PRESSURE GAUGE HOSE – V6

ENGINE

Used in conjunction with gauge AU338

and coupler 212157 to check fuel

pressure on V6 engined vehicles.

Mandatory

TOOL

NUMBER ILLUSTRATION DESCRIPTION CLASSIFICATION

J 23738-A

VACUUM PUMP (20 IN. HG MINIMUM)

Used for many applications where a

controlled vacuum is required to be

applied.

Previously released and also

commercially available

Mandatory

J 33095 MICRO-PACK TERMINAL REMOVER

Used for the safe removal of Micro-Pack

connector terminals.

Previously released.

Unique

J 34142-A UNPOWERED TEST LIGHT

Previously released as CT-40-C and

also commercially available

Must have a current draw less than 0.3

Amp.

Mandatory

J 35616-A CONNECTOR TEST ADAPTOR KIT

Used when carrying out electrical

diagnostic circuit checks.

Previously released

Desirable

J 36400-5 WEATHER PACK TERMINAL

REMOVER

Used for the safe removal of Weather-

Pack connector terminals.

Also previously released as

J 36400-5.

Desirable

J 37027-A

IAC MOTOR ANALYSER

Used when carrying out electrical

diagnostic circuit checks.

Previously released

Mandatory

J 39021

GEN3 0151

FUEL INJECTOR COIL/BALANCE

TESTER

Used in conjunction with a DMM for

testing the fuel injector coil windings and

for injector balance testing

Previously released

Mandatory

TOOL

NUMBER ILLUSTRATION DESCRIPTION CLASSIFICATION

J 35314-A

EXHAUST BACK PRESSURE GAUGE

(WITH ADAPTOR)

Used to check the exhaust system back

pressure.

Also previously released as BT-8515.

Unique

J 44152 JUMPER HARNESS

Used for checking automatic

transmission during diagnostic checks.

Also previously released as J 39775.

Mandatory

J 34730-2C

INJECTOR TEST LIGHT

Used to check for power and the control

circuit of the fuel injector, for proper

operation.

Also previously released as ST-8329.

Mandatory