SECTION 6C2-6 - SPECIAL TOOLS
TOOL
NUMBER ILLUSTRATION DESCRIPTION CLASSIFICATION
3588
DIGITAL MULTIMETER
Used for various measurement
functions as detailed in the text.
Previously released as J 39200,
3545 GM and also commercially
available with a minimum of 10
Megohm impedance.
Available
7230
HEI TESTER
Also previously released as ST-125 .
Mandatory
7371
QUICK CONNECT RELEASE TOOL
FOR V6 SUPERCHARGED ENGINE
Used for releasing the fuel inlet and
return hose quick connects at the
dash panel connections, after
depressurising the fuel system.
Previously released.
Desirable
7000086I
TECH 2 SCAN TOOL
Used for diagnosis of vehicle
electrical systems.
Previously released.
Mandatory
AU338
FUEL PRESSURE GAUGE - HIGH
PRESSURE
Used for checking system fuel
pressure in conjunction with AU453.
Also previously released as
SD28018.
Mandatory
AU453
FUEL GAUGE SCHRADER FITTING
ADAPTOR
(V6 SUPERCHARGED)
Used for Checking Fuel System
Pressure in Conjunction with
SD28018.
Previously released.
Mandatory
AU469
FUEL SENDER LOCKNUT
WRENCH
This tool is used for removal of the
modular fuel sender assembly
retaining ring.
Also previously released as J 39765.
Mandatory
TOOL
NUMBER ILLUSTRATION DESCRIPTION CLASSIFICATION
GM24505373
BYPASS ACTUATOR ADJUSTING
TOOL
Used for the removal and adjustment
of the bypass actuator
Previously released
Desirable
J 23738-A
VACUUM PUMP (20 IN. HG
MINIMUM)
Used for many applications where a
controlled vacuum is required to be
applied.
Previously released and also
commercially available
Mandatory
J 25359-19 NO. 15 TORX BIT
Used to remove PROM access cover
from PCM.
Previously released and also
commercially available.
Desirable
J 33095 MICRO-PACK TERMINAL REMOVER
Used for the safe removal of Micro-
Pack connector terminals.
Previously released.
Unique
J 34142-A UNPOWERED TEST LIGHT
Previously released as CT-40-C and
also commercially available
Must have a current draw less than
0.3 Amp.
Mandatory
J 35616-A CONNECTOR TEST ADAPTOR KIT
Used when carrying out electrical
diagnostic circuit checks.
Previously released
Desirable
J 36400-5 WEATHER PACK TERMINAL
REMOVER
Used for the safe removal of Weather-
Pack connector terminals.
Also previously released as
J 36400-5.
Desirable
J 37027-A
IAC MOTOR ANALYSER
Used when carrying out electrical
diagnostic circuit checks.
Previously released
Mandatory
TOOL
NUMBER ILLUSTRATION DESCRIPTION CLASSIFICATION
J 39021
GEN3 0151
FUEL INJECTOR COIL/BALANCE
TESTER
Used in conjunction with a DMM for
testing the fuel injector coil windings
and for injector balance testing
Previously released
Mandatory
J 35314-A
EXHAUST BACK PRESSURE GAUGE
(WITH ADAPTOR)
Used to check the exhaust system
back pressure.
Also previously released as BT-8515.
Unique
J 44152
JUMPER HARNESS
Used for checking automatic
transmission during diagnostic checks.
Also previously released as J 39775.
Mandatory
J 34730-2C
INJECTOR TEST LIGHT
Used to check for power and the
control circuit of the fuel injector, for
proper operation.
Also previously released as ST-8329.
Mandatory