
Lubricati on and Service Page 0B–4
Page 0B–4
2.1 Recommended Lubricants
APPLICATION LUBRICANT
Brake system (Domest ic) Heavy duty brake fluid, conforming to Holden
Specification Number HN 1796 (Super DOT 4).
Brake system (Export) Heavy duty brake fluid, DOT 4 Plus, SAE J1704.
Engine oil: (Domestic) SAE 10W/30 SJ ILSAC GF2 Engine Oil. If this oil is
unavailable, use SJ engine oil with a viscosity of 20W/50
or 15W/40.
Engine oil: (Export)
SAE 10W/30 SJ ILSAC GF2 Engine Oil. If this oil is
unavailable, use SG, SH or SJ engine oil with a viscosity
of 20W/50 or 15W/40. If driving for more than 10 minutes
at a time in extreme conditions (higher than 180 km/h and
or r.p.m. over 4,000), use SJ (or better) synthetic engine
oil, viscosity grade 20W/50 or 15W/50.
Coolant concentrate (V6 domestic only)
50% clean fresh water and 50% coolant, conforming to
Holden specification Number HN 2043, Part Number
92140054 (1 litre) or 92140057 (5 litres). In addition, 3
pellets, Part Number 92140053 must be added when the
coolant is repl ace d.
Coolant concentrate (GEN III V8 and all export models) 50% clean fresh water and 50% extended life anti-freeze
coolant conforming to Specification Number GM 6277M,
Part Number 92145527 (5 litre)