Propeller Shaft and Universal Joints Page 4C–1

28-FEB-2003 Page 4C–1

Section 4C

Propeller Shaft and Universal Joints

ATTENTION

Before performing any Service Operation or other procedure described in this Section, refer to Section 00

CAUTIONS AND NOTES for correct workshop practices with regard to safety and/or property damage.

1 General Information............................................................................................................................... 2

2 Specifications......................................................................................................................................... 3

2.1 Propeller Shaft Identification.................................................................................................................................3

Propeller Shaft and Universal Joints Page 4C–2

28-FEB-2003 Page 4C–2

1 General Information

With the following exceptions, MY 2004 WK propeller shaft information carries over MY 2003 VY Series vehicles. For

information not contained in this Section, refer to Section 4C, Propeller Shaft and Universal Joints in the MY 2003 VY

and V2 Series Service Information.

• The propeller shaft specifications are unique.

Propeller Shaft and Universal Joints Page 4C–3

28-FEB-2003 Page 4C–3

2 Specifications

2.1 Propeller Shaft Identification

A two-digit production identification code is provided on the

production identification label (A).

Identification of the propeller shaft assembly, which is

matched to the vehicle engine, can be achieved by cross-

referencing the production identification code with the table

below.

Figure 4A-1

ENGINE TYPE PROPELLER

SHAFT

MASS (kg)

I.D. CODE

V6 PFI 9.9 NB

V6 SUPERCHARGED 10.1 NL

GEN III V8 10.1 NF