Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • Body Structure Repair Manual
  • Section 3 Body Construction
    • 1 General Information
      • 1.1 Body Structure Part Refinishing
      • 1.2 Anti-Corrosive Treatment
      • 1.3 Paint Refinishing
        • Panel Refinishing
        • Paint Code
    • 2 Body Structure Panels
      • 2.1 Front End and Underbody
      • 2.2 Upperbody Structure – Excluding Roof Structure
      • 2.3 Roof Structure
      • 2.4 Body Structure
    • 3 Body Dimensions
      • 3.1 Underbody Dimensions – Projected
      • 3.2 Upperbody Dimensions – Actual
        • Front
        • Side and Interior
        • Rear
    • 4 Body Margins
    • 5 Body Sealing, Adhesives And Deadeners
      • 5.1 Acrylic Spot Weld Sealer (Item 2)
        • Acrylic Spot Weld Sealer (Item 2) Continued
      • 5.2 Joint Sealer (Item 3)
        • Joint Sealer (Item 3) Continued
        • Joint Sealer (Item 3) Continued
        • Joint Sealer (Item 3) Continued
        • Joint Sealer (Item 3) Continued
        • Joint Sealer (Item 3) Continued and Hand Putty (Item 4)
      • 5.3 Adhesive – Anti-Flutter (Item 5)
        • Adhesive – Anti-Flutter (Item 5) Continued
      • 5.4 Adhesive – Structural (Item 6)
      • 5.5 Spray-on Deadener
      • 5.6 Deadener Panels and Insulators
      • 5.7 Fusible Reinforcement Patches
        • Replace
    • 6 Cavity Wax
      • Cavity Wax Equivalents
    • 7 Bumper Impact Bar Assemblies
      • 7.1 Front
        • Remove
        • Reinstall
      • 7.2 Rear
        • Remove
        • Reinstall
    • 8 Special Tools
Made by Mibble ♥