holden.wiki

• MODEL SELECTION INDEX
• BODY STRUCTURE REPAIR MANUAL - MENU
• SECTION 10C – BODY REAR – UTILITY
  • 1. GENERAL DESCRIPTION
    • 1.1 BODY REAR COMPONENTS
  • 2. SERVICE OPERATIONS
    • 2.1 REAR END LOWER PANEL – REPLACE
      • REMOVE
      • REPLACE
    • 2.2 ENDGATE HINGE BRACKET ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.3 REAR END PANEL – REPLACE
      • REMOVE
      • REPLACE
    • 2.4 LOAD FLOOR CENTRE RAIL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.5 LOAD FLOOR REINFORCEMENT RAIL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.6 CROSSMEMBER ASSEMBLY NO. 2 – REPLACE
      • REMOVE
      • REPLACE
    • 2.7 REAR FLOOR PANEL OUTER EXTENSION – REPLACE
      • REMOVE
      • REPLACE
    • 2.8 REAR TIE DOWN ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.9 REAR SIDE RAIL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.10 LOAD FLOOR PANEL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE
    • 2.11 REAR FLOOR PANEL ASSEMBLY – REPLACE
      • REMOVE
      • REPLACE