holden.wiki

• MODEL SELECTION INDEX
• Holden Special Vehicles - Menu
• Section CSuspension
  • 1 Purpose
    • 1.1 General Description
  • 2 Wheel Alignment
    • 2.1 Steering Geometry
      • Caster
      • Camber
      • Wheel Toe
      • Steering Axis Inclination
      • Scrub Radius
      • Included Angle
      • Toe-Out On Turns
    • 2.2 Wheel Alignment Checking and Adjustment
      • Preliminary Inspection
      • Caster Adjustment
      • Camber Adjustment
      • Toe Adjustment
    • 2.3 Jacking Precautions
    • 2.4 Front Wheel Hub Assembly – End Float Checking Procedure
  • 3 Front Suspension
    • 3.1 Service Notes And Cautions
    • 3.2 Front Wheel Hub Assembly and Brake Rotor
      • Remove
      • Inspect
      • Reinstall
    • 3.3 Front Wheel Hub Studs
      • Replace
    • 3.4 Front Strut Assembly
      • Remove
      • Reinstall
    • 3.5 Upper Strut Support Bearing and Mount
      • Remove
      • Reinstall
    • 3.6 Front Spring
      • Remove
      • Reinstall
    • 3.7 Front Strut Unit
      • Replace
    • 3.8 Steering Knuckle
      • Remove
      • Reinstall
    • 3.9 Front Control Arm Ball Joint Assembly
      • Inspect
      • Remove
      • Reinstall
    • 3.10 Front Control Arm
      • Remove
      • Reinstall
    • 3.11 Front Control Arm Rear Bushing
      • Replace
    • 3.12 Front Control Arm Front Isolating Bushing
      • Inspect
      • Replace
    • 3.13 Front Suspension Crossmember Cradle
      • Remove
      • Reinstall
    • 3.14 Stabiliser Bar Link
      • Replace
    • 3.15 Stabiliser Bar Isolator Bushes
      • Replace
    • 3.16 Stabiliser Bar
      • Remove
      • Reinstall
  • 4 Independent Rear Suspension
    • 4.1 General Information
    • 4.2 Rear Axle
    • 4.3 Propeller Shaft And Universal Joints
    • 4.4 Service Operations
      • General
      • Rear Axle
      • Propeller Shaft And Universal Joints
  • 5 Diagnosis
    • 5.1 General
      • Strut Diagnosis
      • Acceptance Criteria
    • 5.2 Diagnosis Guide
      • Hard or Heavy Steering
      • Excessive Play or Looseness in Steering
      • Erratic Steering on Application of Brakes
      • Vehicle Pulls to One Side
      • Front or Rear Wheel Tramp
      • Road Shocks
      • Scuffed Tyres
      • Cupped Tyres
      • Front Wheel Shimmy
      • Vehicle Wanders
  • 6 Front Suspension Specifications
    • Suspension Travel
    • Front Spring Details
    • Front Stabiliser Bar Details
    • Front Strut Details
    • Front Control Arm Details
    • Front Control Arm Ball Joint
    • Front Wheel Bearings
    • Wheel Bearing Angular 'Float'
    • Suspension Trim Height Specifications
    • Front Wheel Alignment Specifications
  • 7 Rear Suspension Specifications
    • Rear Spring Detail
    • Rear Shock Absorber Detail
    • Rear Stabiliser Bar Detail
    • Rear Suspension Service Alignment Data
  • 8 Torque Specifications
  • 9 Special Tools